Adaptec 39106 manual Configuring the Adaptec Scsi Card 39160 with SCSISelect

Page 29

Configuring the Adaptec SCSI Card 39160 with SCSISelect

Caution: You may lose data if you remove a removable- media cartridge from a SCSI drive controlled by the SCSI card BIOS while the drive is on. If you want to be able to remove the media while the drive is on, install the removable-media software driver and set Support Removable Disks Under BIOS as Fixed Disks to Disabled.

Boot Only—Only the removable-media drive designated as the boot device is treated as a hard disk drive.

All Disks—All removable-media drives supported by the BIOS are treated as hard disk drives.

BIOS Support for Bootable CD-ROM—(Default:Enabled) When set to Enabled, the SCSI card BIOS allows the computer to boot from a CD-ROM drive.

BIOS Support for Int 13 Extensions—(Default:Enabled) When set to Enabled, the SCSI card BIOS supports Int 13h extensions as required by Plug-and-Play. The setting can be either enabled or disabled if your system is not Plug-and-Play.

23

Image 29
Contents USER’S Reference Adaptec, Inc South Milpitas Boulevard Milpitas, CA Ultra160 Scsi Controller Adaptec Scsi CardPage Troubleshooting Connecting Scsi Devices Ultra160 Scsi on the Adaptec Scsi Card OverviewUnderstanding Scsi Scsi IDs Terminating the Scsi Bus Troubleshooting Checklist TroubleshootingClick the Device Manager tab Troubleshooting in Windows 95/98Troubleshooting Select Scsi controllers and click Next Double-clickif you have a hardware conflict Device connected, but not ready Common Error MessagesStart unit request failed Time-out failure duringUsing Scsi Hard Disk Drives Using Scsi DevicesUsing Scanners Using Ultra160 Hard Disk DrivesSupport BBS? From Scsi drive? Then do this Combining Scsi and Non-SCSI DevicesConnecting the LED Connector Installing Multiple Scsi CardsOverriding Scsi Termination Settings Scsi Bus Interface Definitions SCSISelect Options Available SettingsBoot Device Options Advanced Configuration Options Scsi Device ConfigurationExiting SCSISelect Starting SCSISelectScsi Bus Interface Definitions Using SCSISelect SettingsBoot Device Options Scsi Device Configuration Options Advanced Configuration Options Adaptec Scsi Card 39160 User’s Reference Configuring the Adaptec Scsi Card 39160 with SCSISelect Using Scsi Disk Utilities Connecting Scsi Devices Cable Length Data Transfer Rate Maximum Cable LengthsMaximum Trademarks CopyrightChanges DisclaimerSales and Ordering Information Adaptec Customer SupportEuropean Union Compliance Statement Regulatory Compliance StatementsJapanese Compliance Adaptec Software License Agreement