Adaptec 39106 manual Scsi Device Configuration, Advanced Configuration Options

Configuring the Adaptec SCSI Card 39160 with SCSISelect

SCSISelect Options	Available Settings	Default Setting
SCSI Device Configuration:
Sync Transfer Rate (MBytes/sec)	160, 80.0, 53.4, 40.0,	160
	32.0, 26.8, 20.0,
	16.0, 13.4, 10.0,
	ASYN
Initiate Wide Negotiation	Yes, No	Yes (Enabled)
Enable Disconnection	Yes, No	Yes (Enabled)
Send Start Unit Command	Yes, No	Yes (Enabled)
Enable Write Back Cache 2	Yes, No,	N/C (No
	N/C (No Change)	Change)
BIOS Multiple LUN Support 2	Yes, No	No (Disabled)
Include in BIOS Scan 2	Yes, No	Yes (Enabled)
Advanced Configuration Options:
Reset SCSI Bus at IC Initialization	Enabled, Disabled	Enabled
Display <Ctrl> <A> Messages during	Enabled, Disabled	Enabled
BIOS Initialization [Auto-sync]
Extended BIOS Translation for	Enabled, Disabled	Enabled
DOS Drives > 1 GByte
Verbose/Silent Mode [Auto-sync]	Verbose, Silent	Verbose
Host Adapter BIOS [Auto-sync]	Enabled	Enabled
	Disabled: Scan Bus
	Disabled: Not Scan
Domain Validation 2 [Auto-sync]	Enabled, Disabled	Enabled
Support Removable Disks Under BIOS	Disabled,	Disabled
as Fixed Disks 2	Boot Only,
	All Disks
BIOS Support for Bootable CD-ROM 2	Enabled, Disabled	Enabled
BIOS Support for Int 13 Extensions 2	Enabled, Disabled	Enabled

1Setting is valid only if Multiple LUN Support is enabled.

2Settings are valid only if host adapter BIOS is enabled.

17