Troubleshooting

4Double-click the SCSI Controller icon. The software driver for the Adaptec SCSI Card 39160 is listed as 29160(N), 39160, AHA-3960D,AIC-7892/7899 Ultra160 PCI SCSI Controller.

■If the driver is listed, the Adaptec SCSI Card 39160 driver is loading properly.

■If the driver is listed but has an exclamation mark inside a yellow circle the software driver may conflict with other hardware using the same resources. Double-click the icon to see the device status and possible solutions.

■If the driver is listed but has an “X” inside a red circle, the Adaptec SCSI Card 39160 software driver is disabled and isn’t loading.

■If the SCSI Controller icon or the Adaptec SCSI Card 39160 software driver is not listed, reinstall the driver. (For instructions on how to do this, refer to the Ultra160 Family Manager Set User’s Guide.)

An “X” inside a red circle appears with the Adaptec SCSI Card 39160 software driver in Device Manager. What does this mean?

It means that the Adaptec SCSI Card 39160 software driver is dis- abled and isn’t loading.

To enable the driver

1Double-click the Adaptec SCSI Card 39160 software driver in Device Manager.

2Under the General tab, click the Original Configuration (cur- rent) box.

What if there is no SCSI Controller icon under Device Manager, or the software driver for the Adaptec SCSI Card 39160 does not appear under Device Manager?

If the SCSI Controller icon or the software driver do not appear

1Double-click the Add New Hardware icon in Control Panel.

2Click Next to begin installing your new hardware.

3Select Yes (recommended) and click Next to have Windows search for the Adaptec SCSI Card 39160.

4Follow the on-screen instructions.