Adaptec 39106 manual Adaptec Scsi Card, Ultra160 Scsi Controller

Page 3

▼ ▼ ▼ Adaptec SCSI Card 39160

Ultra160 SCSI Controller

User’s Reference

R

Image 3
Contents USER’S Reference Adaptec, Inc South Milpitas Boulevard Milpitas, CA Ultra160 Scsi Controller Adaptec Scsi CardPage Troubleshooting Connecting Scsi Devices Ultra160 Scsi on the Adaptec Scsi Card OverviewUnderstanding Scsi Scsi IDs Terminating the Scsi Bus Troubleshooting Checklist TroubleshootingClick the Device Manager tab Troubleshooting in Windows 95/98Troubleshooting Select Scsi controllers and click Next Double-clickif you have a hardware conflict Time-out failure during Common Error MessagesDevice connected, but not ready Start unit request failedUsing Scsi Hard Disk Drives Using Scsi DevicesUsing Scanners Using Ultra160 Hard Disk DrivesSupport BBS? From Scsi drive? Then do this Combining Scsi and Non-SCSI DevicesConnecting the LED Connector Installing Multiple Scsi CardsOverriding Scsi Termination Settings SCSISelect Options Available Settings Boot Device OptionsScsi Bus Interface Definitions Advanced Configuration Options Scsi Device ConfigurationExiting SCSISelect Starting SCSISelectUsing SCSISelect Settings Boot Device OptionsScsi Bus Interface Definitions Scsi Device Configuration Options Advanced Configuration Options Adaptec Scsi Card 39160 User’s Reference Configuring the Adaptec Scsi Card 39160 with SCSISelect Using Scsi Disk Utilities Connecting Scsi Devices Maximum Cable Lengths MaximumCable Length Data Transfer Rate Disclaimer CopyrightTrademarks ChangesSales and Ordering Information Adaptec Customer SupportEuropean Union Compliance Statement Regulatory Compliance StatementsJapanese Compliance Adaptec Software License Agreement