Accusys eXpeRAID manual CLI Reply Status, InBandController command success InBand command failed

Page 11

ACCUSYS, INC.

5F, 38 TAIYUAN ST, JHUBEI, HSINCHU, TAIWAN, R.O.C.

TITLE	EXPERAID COMMAND LINE INTERFACE USER GUIDE
PROJECT		“DESKTOP RAID”	DOCUMENT STATUS	OFFICIAL RELEASE
REV.	G–05-NOV-2007			PAGE 11 OF 27

3.2 CLI Reply Status

zInBand(Controller) command success.

zInBand command failed.

CLI will display “Reason: <Error reason description>”.

zInvalid command: CLI receives unrecognized commands.

zInvalid parameter “Param”: CLI receives incorrect parameter of the input command. CLI will display the command usage when this error occurs under the interactive mode.

zSyntax error: Parameter(s) of the input command doesn’t match the command syntax. CLI will also display the command usage under the interactive mode.

zOther errors: <Specific error description>.

Image 11

Contents Nov 05 Version EXpeRAID Command Line Interface User GuideRevision History Contents Basic Array Configuration Commands Appendix UpdateSystemCode UpdateBootCode UpdateBIOSEFISupported Operating Systems OverviewExample for Linux special case Pre-actionNon-interactive Mode Execution ModeInteractive Mode ACCUSYS, INC Format Conventions CLI Command FormatCommand Syntax Command Name Format 1 …Format nCLI Reply Status InBandController command success InBand command failedCLICheckPassword 00000000 Enter CLI Command SetBasic CLI Commands Command Name Command DescriptionExample CLICtrlName Ctrl1 Enter CLIDumpArrayInfo 1 Enter Information Display Commands2.9 2.62.7 2.8R5 RAID Level Basic Array Configuration Commands3.1 RAID Level Level=R0R1R5R6 R0 RAID Level R01 R1 RAID LevelCLISetSlice Array=1 Slice=0 Size=120 Enter CLIDeleteArray 1 EnterCLISetLunMap Lun=0 Array=1 Slice=0 Enter CLISetLunMap Lun=0 JBOD=1 EnterCLIMigrateArray Array=1 TargetLevel=R5 DriveCnt=4 Enter Advanced Array Configuration CommandsCLIExpandArray Array=1 DriveCnt=3 Enter Example CLIRefreshArray Array=1 State=StartEnter Example CLIRebuildParity Array=1 State=Start EnterMirror Snapshot Configuration Commands Min=0 Enter Parameter Parameter ExampleCLISplitScheduling Shot=1 Year=07 Month=12 Day=15 Hour=0 5.6 Miscellaneous CommandsEnableDisable Enable / Disable Disk Lag Proof mode 6.2 EnableDisable Enable / Disable NCQ mode 6.3EnableDisable Enable/Disable Synchronize Cache mode EnableDisable Enable/Disable controller beeper 6.6EnableDisable Enable / Disable Equalization Mode 6.7 EnableDisable Enable/Disable controller cache 6.8Day Day =1~31 CtrlTime Use this command to set controller time6.9 Month Month =1~127.1 Firmware Update CommandsR0+1 N Disks Array Migration MatrixR0 N Disks R1 N Disks R5 N Disks