Accusys eXpeRAID manual Mirror Snapshot Configuration Commands

						ACCUSYS, INC.
					5F, 38 TAIYUAN ST, JHUBEI, HSINCHU, TAIWAN, R.O.C.
	TITLE	EXPERAID COMMAND LINE INTERFACE USER GUIDE
	PROJECT		“DESKTOP RAID”			DOCUMENT STATUS	OFFICIAL RELEASE
	REV.	G–05-NOV-2007					PAGE 21 OF 27
3.3.4.6
Command Name				Command Description
RefreshPriority				Use this command to set the priority of array refreshment. This setting
				would be applied to all arrays which are being refreshed.
Parameter 1				Parameter Description
<High:Medium:Low>				Select the priority for array refreshment function.
3.3.4.7
Command Name				Command Description
UnlockDrive				Use this command to unlock a locked drive.
Parameter 1				Parameter Description
Drive No.:				Drive No.:
<1~n>				<1~n>, where n stands for the maximum locked drive number.

3.3.5 Mirror Snapshot Configuration Commands

3.3.5.1

Command Name	Command Description
CreateShot	Use this command to create a mirror snapshot.
Parameter 1	Parameter Description
Shot No.:	Shot No.:
<Shot=<1~8>>	Specify the mirror snapshot number to be created.
Parameter 2	Source Array No.:
Source Array No.:
<SourceArray=<1~4>:	SourceArray =1~4, uses an array as the source shot.
SourceJBOD=<1~n>>	SourceJBOD=1~n, uses JBOD as the source shot.
Parameter 3	Backup Array No.:
Source Slice No.:
<SourceSlice= <0~15>>	BackupArray =1~4, uses an array as the backup shot.
Parameter 4	BackupJBOD=1~n, uses JBOD as the backup shot.
Backup Array No.:	Slice No.:
<BackupArray =<1~4>:
BackupJBOD=<1~n>>	This parameter is not needed when parameter 2 or parameter 4 uses
	JBOD.
Parameter 5
Backup Slice No.:
<BackupSlice= <0~15>>	Example
	CLI>CreateShot	Shot=1	SourceArray=1	SourceSlice=0
	BackupJBOD =1 [Enter]
	Shot 1 will be created and data in slice 0 of Array 1 will start to backup
	to JBOD1 if all parameters meet legal conditions.