Accusys eXpeRAID manual CLI Command Set, Basic CLI Commands, Command Name Command Description

ACCUSYS, INC.

5F, 38 TAIYUAN ST, JHUBEI, HSINCHU, TAIWAN, R.O.C.

TITLE	EXPERAID COMMAND LINE INTERFACE USER GUIDE
PROJECT		“DESKTOP RAID”	DOCUMENT STATUS	OFFICIAL RELEASE
REV.	G–05-NOV-2007			PAGE 12 OF 27

3.3CLI Command Set

3.3.1Basic CLI Commands

3.3.1.1

Command Name	Command Description
Main	Use this command to show the main information page, which lists all
	available CLI commands with brief descriptions.
	Parameter Description
	N/A
3.3.1.2
Command Name	Command Description
CtrlIndex	Use this command to set a specified controller to be active. The default
	controller will be set to controller 0 if it exists.
Parameter 1	Parameter Description
Controller index:	Controller index:
<0~n>	<0~n>, where n stands for the maximum index number of the available
	controller(s).
3.3.1.3
Command Name	Command Description
CheckPassword	Use this command to verify password of the active controller. The
	controller commands can only be issued after the password being
	verified.
Parameter 1	Parameter Description
Password:	Password:
<CHARS>	CHARS must be an 8-character alphabetic string.
	Example
	CLI>CheckPassword 00000000 [Enter]
	If 00000000 is a correct password for the active controller, then CLI
	will return success and the controller can receive commands normally
	after that.