Accusys eXpeRAID manual CLISetLunMap Lun=0 JBOD=1 Enter, CLISetLunMap Lun=0 Array=1 Slice=0 Enter

ACCUSYS, INC.

5F, 38 TAIYUAN ST, JHUBEI, HSINCHU, TAIWAN, R.O.C.

TITLE	EXPERAID COMMAND LINE INTERFACE USER GUIDE
PROJECT		“DESKTOP RAID”	DOCUMENT STATUS	OFFICIAL RELEASE
REV.	G–05-NOV-2007			PAGE 18 OF 27

3.3.3.6

Command Name	Command Description
SetLunMap	Use this command to set a Lun Map for an existing slice or JBOD.
Parameter 1	Parameter Description
LUN No.:	LUN No.:
<Lun=<0~63>>	Specify the Lun number to be mapped.
Parameter 2	Array No.:
Array No.:
<Array=<1~4>:	Array =1~4, Maps Lun to a specified Array
JBOD= <1~n>>	JBOD=1~n, Maps Lun to a specified JBOD
	Slice No.:
Parameter 3
Slice No.:	This parameter is not needed when parameter 2 uses JBOD.
<Slice= <0~15>>
	Example
	CLI>SetLunMap Lun=0 JBOD=1 [Enter]
	Lun 0 will be mapped to JBOD1 if it exists.
	CLI>SetLunMap Lun=0 Array=1 Slice=0 [Enter]
	Lun 0 will be mapped to slice 0 of array 1 if it exists.
3.3.3.7
Command Name	Command Description
DeleteLunMap	Use this command to delete an existing Lun Map.
Parameter 1	Parameter Description
LUN No.:	Lun No.:
<0~63>	Specify the Lun number to be unmapped.