Accusys eXpeRAID manual Revision History

Page 2

ACCUSYS, INC.

5F, 38 TAIYUAN ST, JHUBEI, HSINCHU, TAIWAN, R.O.C.

TITLE

EXPERAID COMMAND LINE INTERFACE USER GUIDE

 

PROJECT

 

“DESKTOP RAID”

DOCUMENT STATUS

OFFICIAL RELEASE

REV.

G–05-NOV-2007

 

 

PAGE 2 OF 27

Revision History

Rev – A

JeffChang

1.

Initial Draft.

11-JUN -2007

 

 

 

Rev – B

ShoneCheng

2.

Removed unnecessary commands and modified command

10-AUG -2007

 

 

names to match GUI’s.

 

 

3.

Modified some command names and parameters of command

Rev – C

ShoneCheng

 

‘SetLunMap’, ‘CreateShot’ and ‘MigrateArray’, added Appendix I

14-AUG -2007

 

for Migration command reference. Added ‘CancelSplitSchedule’

 

 

 

 

 

command.

Rev – D

ShoneCheng

4.

Removed parameter “Array” for CreateArray command. Added

 

DumpMiscInfo and DumpDriveInfo commands. Modified the

03-SEP -2007

 

 

 

description of DumpCtrlEvent command.

 

 

 

Rev – E

 

5.

Removed CLI command “BatteryState”. Added Chapter 1

ShoneCheng

 

“Introduction” and Chapter 2 “Using CLI”, the original Chapter 1

19-OCT -2007

 

 

 

had been moved to Chapter 3.

 

 

 

Rev – F

ShoneCheng

6.

Modified the description in section 2.1 Pre-action.

02-NOV -2007

 

 

 

Rev – G

ShoneCheng

7.

Official release version 1.0.

05-NOV -2007

 

 

 

Image 2
Contents EXpeRAID Command Line Interface User Guide Nov 05 VersionRevision History Contents Basic Array Configuration Commands UpdateSystemCode UpdateBootCode UpdateBIOSEFI AppendixOverview Supported Operating SystemsPre-action Example for Linux special caseNon-interactive Mode Execution ModeInteractive Mode ACCUSYS, INC Command Name Format 1 …Format n CLI Command FormatCommand Syntax Format ConventionsInBandController command success InBand command failed CLI Reply StatusCommand Name Command Description CLI Command SetBasic CLI Commands CLICheckPassword 00000000 EnterExample CLICtrlName Ctrl1 Enter Information Display Commands CLIDumpArrayInfo 1 Enter2.8 2.62.7 2.9RAID Level Level=R0R1R5R6 R0 RAID Level R01 R1 RAID Level Basic Array Configuration Commands3.1 R5 RAID LevelCLIDeleteArray 1 Enter CLISetSlice Array=1 Slice=0 Size=120 EnterCLISetLunMap Lun=0 JBOD=1 Enter CLISetLunMap Lun=0 Array=1 Slice=0 EnterCLIMigrateArray Array=1 TargetLevel=R5 DriveCnt=4 Enter Advanced Array Configuration CommandsCLIExpandArray Array=1 DriveCnt=3 Enter Example CLIRebuildParity Array=1 State=Start Enter Example CLIRefreshArray Array=1 State=StartEnterMirror Snapshot Configuration Commands Min=0 Enter Parameter Parameter ExampleCLISplitScheduling Shot=1 Year=07 Month=12 Day=15 Hour=0 EnableDisable Enable / Disable NCQ mode 6.3 Miscellaneous CommandsEnableDisable Enable / Disable Disk Lag Proof mode 6.2 5.6EnableDisable Enable/Disable controller cache 6.8 EnableDisable Enable/Disable controller beeper 6.6EnableDisable Enable / Disable Equalization Mode 6.7 EnableDisable Enable/Disable Synchronize Cache modeMonth Month =1~12 CtrlTime Use this command to set controller time6.9 Day Day =1~31Firmware Update Commands 7.1R1 N Disks R5 N Disks Array Migration MatrixR0 N Disks R0+1 N Disks