2.9 Re-connect cables
You may have disconnected some cables when you were installing components. You must
2.9.1LED cables
Power Switch
Power LED
HDD LED
PANEL1 Connector
Power LED
Speaker Connector
| +5VSB | PLED | +5V | Ground Ground Speaker |
| +5 V | MLED | ExtSMI# Ground PWR Ground | Reset Ground |
| MessageLED |
| Reset SW | |
| ATX Power | |||
| SMI Lead |
| ||
PANEL1 |
| Switch* | ||
* Requires an ATX power supply. |
IDE_LED1
•Connect the power switch and power LED cables to their respective leads in the PANEL1 connector on the motherboard.
•Connect the HDD LED cable to the 2-pin lead marked IDE_LED1.
ASUS Terminator P4 533 Barebone System | 29 |