6.1.3.Network Setting
|
| Network Setting |
|
| |
| Internet | The default camera name is “IC1500WG”. It is recommended to name a meaningful name for |
| Camera Name | the camera. |
| IP Address | Enter an unused IP Address within the IP address range used on your LAN. If the IP Address of |
| your LAN is from the 192.168.2.1 to 192.168.2.254, you can set an unused IP Address from the | |
|
| range for the camera, for example: 192.168.2.250. |
|
|
|
| Subnet Mask | The Subnet Mask field must match the subnet setting on your LAN. For example: 255.255.255.0. |
|
|
|
| Gateway | The Gateway is used to forward frames to destinations in a different subnet on the Internet. The |
| Gateway setting must be the same with the gateway used by the PCs on your LAN. | |
|
| |
|
|
|
| DNS Server | DNS Server (Domain Name Server) that translates names to IP addresses. Set the same DNS |
| Server as the PCs on your LAN. | |
|
|
|
| Network Setting |
|
| |
| Video Port | The Video Port is used to transmit or receive the video streaming in the network. The default port |
| setting is “4321”. If you want to view the video from the camera, the port setting should be | |
|
| correct. |
|
|
|
| Web Port | This camera support web connection, the default web port is 80. Since the web server may use |
| port 80, you can use a different port for the camera. If you change the web port from 80 to 8080, | |
|
| you must type http://192.168.2.3:8080 to connect the camera through the web browser. |
9