Edimax Technology IC-1500 manual Mail and FTP

	The WEP keys are used to encrypt data transmitted in the wireless network.
	Fill the text box by following rules below.
	64-bit – Input 10-digit Hex values (in the “A-F”, “a-f” and “0-9” range) or 5-digit ASCII
Key1 ~ Key4	characters (including “a-z” and “0-9”) as the encryption keys. For example:
	“0123456aef“ or “test1”.
	128-bit – Input 26-digit Hex values (in the “A-F”, “a-f” and “0-9” range) or 13-digit ASCII
	characters (including “a-z” and “0-9”) as the encryption keys. For example:
	“01234567890123456789abcdef“ or “administrator”.
Apply	When you finish “WLAN” setting, click this button to validate the setting values.

8.1.4.E-Mail and FTP

The “E-Mail & FTP” lets you setup E-Mail client and FTP client that camera can sent live video to your e-mail account or FTP server when Motion has been detected.

	AV Server
Recipient E-Mail Address	This camera supports “Snap Shot” and “Motion Detection” functions. You can
	snapshot a picture and send the picture by E-Mail. Enter the E-Mail Account for
	receiving the picture.
SMTP Server	Enter the SMTP Server for the E-Mail sending.
Sender E-Mail Address	Specified the e-mail address of the e-mail sender.
SMTP Authentication	Enable or Disable the SMTP Authentication function
Username	When Authentication is enabled, input the SMTP Username.
Password	When Authentication is enabled, input the password.
Send a Test Email	Press this button to send a test e-mail to your mailbox. You can use this
	function to test if your setting is correct.
FTP Server	This camera supports “Motion Detection” functions. When Motion Detection
	event occurred, you can record the live video to FTP server. Enter the FTP
	address for receiving the video.
FTP Port	Enter the port of the FTP server.
User Name	Specify the user account of ftp server.
Password	Specify the Password of your ftp account.
Remote Folder	Specify the folder of the ftp site that you want to store the video.
Password	When Authentication is enabled, input the password.
Passive Mode	If your Camera is under NAT, you usually need to enable this feature.
	31