Edimax Technology manual Wlan for IC-1500Wg only

8.1.3.WLAN ( for IC-1500Wg only)

	Wireless Setting
Wireless connection	Enable or disable the wireless function of the Internet Camera. By default, the function
	is disabled.
	Infrastructure – This operation mode requires the presence of a Wireless LAN Access
Network Type	Point or Router. All communication is done via the Access Point or Router.
	Ad-Hoc – Select this mode if you want to connect to another wireless stations in the
	Wireless LAN network without through an
	Access Point or Router.
Available Networks	Select the networks listed below and click apply to connect to the specified network.
	The SSID (up to 32 printable ASCII characters) is the unique name identified in a
	WLAN ( for IC-1500Wg only). The ID prevents the unintentional merging of two
SSID	co-located WLANs.
	You may specify a SSID for the card and then only the device with the same SSID can
	interconnect to the card. If you want to add one of the networks nearby to the profile list,
	pull down the menu, all the networks nearby will be listed and you can add one of them
	to the profile list.
Channel	This setting is only available for Ad Hoc mode. Select the number of the radio channel
	used for the networking. The channel setting should be the same with the network you
	are connecting to.
Basic Rate	The camera will force to the data rate that you selected to transmit data.
	Choose the authentication type you want to use.
Authentication and	“None” means that you don’t want any encryption for wireless. “Open System” means
	that you can use WEP for encryption or not to encryption. When you select “Shared
Encryption Type	Key”, you must use WEP for encryption. The last option is “WPA-PSK”. When you
	select this authentication type, you can encryption your wireless with WPA-TKIP or
	WPA-AES.
WPA Pre-Shared Key	The WPA-PSK key can be from 8 to 64 characters and can be letters or numbers. This
	same key must be used on all of the wireless stations in the network.
WEP Key Length	You may select 64-bit or 128-bit to encrypt transmitted data. Larger key length will
	provide higher level of security, but the throughput will be lower.
WEP Key Format	Hexdecimal – Only “A-F“, “a-f“ and “0-9“ are allowed to be set as WEP key.
	ASCII – Numerical values, characters or signs are allowed to be WEP key. It is more
	recognizable for user.
Default Key	Select one of the keys (1~4) as the encryption key.
	30