8.1.6.System
The “System” allows users to setup the camera’s parameters, like camera name, data/time setting. And also provide firmware upgrade and reset tools at this page.
|
| System |
|
| |
| Camera Name | The default camera name is “IC1500 or IC1500Wg”. It is recommended to name |
| a meaningful name for the camera. | |
|
| |
|
|
|
| Login Name | Setup your administrator account’s login name. Default name is “admin” |
|
|
|
| Password | Enter up to 4 digits password for the new user account. |
|
|
|
| Confirm Password | Enter the password again to confirm the setting. |
|
|
|
| Set Date/Time manually | Set the current Date and Time. |
|
|
|
| NTP Server | Synchronize the Date and Time with NTP server. |
|
|
|
| Time Zone | Select the time zone that your camera put on. |
|
|
|
| NTP Server | Specify the IP Address of the NTP Server. |
|
|
|
| Upgrade Firmware | You can upgrade camera’s firmware via this function. Press the browse button, |
| find the correct firmware and press upgrade. | |
|
| |
| Reset to Factory Defaults | If you want to reset all the camera settings to default, click this button. |
|
|
|
| Reboot Device | To reboot the Internet Camera, click “Reboot”. |
|
|
|
| LED Setting | There are four LEDs to indicate the status of Internet Camera. If you wan to |
| secure the camera from noticing, you can turn off the LED light by clicking “LED | |
|
| Light OFF”. To turn on the LED light, click “LED Light ON”. |
33