Asus AT5NM10T-I manual System panel connector 10-1 pin Fpanel, System power LED 2-pin Pled

Page 25

8.System panel connector (10-1 pin F_PANEL)

This connector supports several chassis-mounted functions.

•System power LED (2-pin PLED)

This 2-pin connector is for the system power LED. Connect the chassis power LED cable to this connector. The system power LED lights up when you turn on the system power, and blinks when the system is in sleep mode.

•Hard disk drive activity LED (2-pin HD_LED)

This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity LED cable to this connector. The HD LED lights up or flashes when data is read from or written to the HDD.

•ATX power button/soft-off button (2-pin PWRBTN)

This connector is for the system power button. Pressing the power button turns the system on or puts the system in sleep or soft-off mode depending on the BIOS settings. Pressing the power switch for more than four seconds while the system is ON turns the system OFF.

•Reset button (2-pin RESET)

This 2-pin connector is for the chassis-mounted reset button for system reboot without turning off the system power.

9.LVDS connector (30-pin CON1)

This connector is for a LCD monitor that supports Low-voltage differential signaling (LVDS) interface.

ASUS AT5NM10-I

E5179_AT5NM10-I.indb 16

1-16

12/22/09 5:56:05 PM

Image 25

Contents Motherboard E5179 First Edition December Contents AI NET Canadian Department of Communications Statement Federal Communications Commission StatementElectrical safety Safety informationOperation safety About this guideConventions used in this guide Where to find more informationTypography Bold textCPU AT5NM10-I specifications summarySpecifications are subject to change without notice Onboard LED Before you proceedMotherboard overview Layout contentsMotherboard layout System memory Central Processing Unit CPUOverview Dimm Memory configurationsDS Brand DDR2-800 MHz capabilityE5179AT5NM10-I.indb 12/22/09 55550 PM SS Single-sided / DS Double-sided Dimm support Configuring an expansion card Installing an expansion cardExpansion slot PCI slotClear RTC RAM 3-pin Clrtc JumpersUSB device wake-up 3-pin USBPW5-8 Keyboard/mouse power 3-pin PS2USBPW1-4Rear panel connectors ConnectorsATX power connectors 24-pin EATXPWR, 4-pin ATX12V Internal connectors USB connector 10-1 pin USB56, USB78 Serial ATA connectors 7-pin SATA1, SATA2Internal speaker connector 4-pin Speaker Chassis intrusion connector 4-1 pin ChassisFront panel audio connector 10-1 pin Aafp CPU and chassis fan connectors 3-pin CPUFAN, 3-pin ChafanSystem power LED 2-pin Pled System panel connector 10-1 pin FpanelATX power button/soft-off button 2-pin Pwrbtn Reset button 2-pin ResetDigital audio connector 4-1 pin Spdifout Serial port connectors 10-1 pin COM2Software support Installing an operating systemSupport DVD information To run the Support DVDAsus Update utility Managing and updating your BiosInstalling Asus Update Updating the BiosAsus EZ Flash Select Update Bios from a file, then click NextRecovering the Bios Asus CrashFree BiosEntering Bios Setup at startup Bios setup programEntering Bios Setup after Post Main menuSystem Date Day xx/xx/xxxx System TimeSata 1/2 Advanced menu Storage ConfigurationSystem Information Chipset CPU ConfigurationOnboard Devices Configuration USB Configuration Suspend Mode S3 Only Power menuAcpi 2.0 Support Enabled Acpi Apic Support EnabledHardware Monitor APM ConfigurationBoot Device Priority Boot menuBoot Settings Configuration Hit ‘DEL’ Message Display Enabled Wait For ‘F1’ If Error EnabledChange Supervisor Password Select the Change Supervisor Password item and press EnterChange User Password User Access Level Full AccessClear User Password Password Check SetupExpress Gate Auto Tools menuExit menu Check Realtek LAN cable DisabledAI NET