2.4.1CPU Configuration
The items in this menu show the
Max CPUID Value Limit [Disabled]
Allows you to determine whether to limit CPUID maximum value. Set this item to [Disabled] for Windows XP operating system; set this item to [Enabled] for legacy operating system such as Windows NT4.0. Configuration options: [Disabled] [Enabled]
Execute-Disable Bit Capability [Enabled]
Allows you to enable or disable the
Hyper Threading Technology [Enabled]
Allows you to enable or disable the Intel® Hyper Threading technology. Configuration options: [Disabled] [Enabled]
2.4.2Chipset
The Chipset menu allows you to change the advanced chipset settings. Select an item then press <Enter> to display the
North Bridge Configuration
DRAM Frequency [Auto]
Allows you to set the DDR2 operating frequency. Configuration options: [Auto] [667MHz] [800MHz]
Configure DRAM Timing by SPD [Enabled]
Allows you to enable or disable configuring the DRAM Timing by SPD.
Configuration options: [Enabled] [Disabled]
Initiate Graphic Adapter [IGD]
Allows you to decide which graphics controller to use as the primary boot device. Configuration options: [IGD] [PCI/IGD]
Internal Graphics Mode Select [Enabled, 8MB]
Sets the IGD graphics mode.
Configuration options: [Enabled, 4MB] [Enabled, 8MB]
Video Function Configruation
DVMT Mode Select [DVMT Mode]
Allows you to select the DVMT mode. Configuration options: [DVMT Mode]
DVMT/FIXED Memory [256MB]
Configuration options: [128MB] [256MB] [Maximum DVMT]
South Bridge Configuration
Audio Controller [Enabled]
Allows you to enable or disable the audio controller.
Configuration options: [Disabled] [Enabled]
Chapter 2: BIOS information |
12/22/09 5:56:15 PM