Asus AT5NM10T-I manual Onboard Devices Configuration

Page 35

2.4.3Onboard Devices Configuration

Onboard LAN [Enabled]

Allows you to enable or disable the onboard LAN controller.

Configuration options: [Enabled] [Disabled]

Onboard LAN Boot ROM [Disabled]

Allows you to enable or disable the boot ROM in the onboard LAN controller. This item appears only when the Onboard LAN item is set to Enabled. Configuration options: [Disabled] [Enabled]

Serial Port1 Address [3F8/IRQ4]

Allows you to select the Serial Port1 base address.

Configuration options: [Disabled] [3F8/IRQ4] [2E8/IRQ4] [2E8/IRQ3]

Serial Port1 Mode [Normal]

Allows you to set the Serial Port1 mode.

Configuration options: [Normal] [IrDA] [ASK IR]

Serial Port2 Address [2F8/IRQ3]

Allows you to select the Serial Port2 base address.

Configuration options: [Disabled] [2F8/IRQ3] [2E8/IRQ4] [2E8/IRQ3]

Serial Port2 Mode [Normal]

Allows you to set the Serial Port2 mode.

Configuration options: [Normal] [IrDA] [ASK IR]

Parallel Port Address [378]

Allows you to select the Parallel Port base addresses. Configuration options: [Disabled] [378] [278] [3BC]

Parallel Port Mode [SSP]

Allows you to select the Parallel Port mode.

Configuration options: [SSP] [EPP] [ECP] [EPP + ECP]

ECP Mode DMA Channel [DMA3]

Appears only when the Parallel Port Mode is set to [ECP]. This item allows you to set the Parallel Port ECP DMA. Configuration options: [DMA0] [DMA1] [DMA3]

Parallel Port IRQ [IRQ7]

Allows you to select parallel port IRQ. Configuration options: [IRQ5] [IRQ7]

ASUS AT5NM10-I

E5179_AT5NM10-I.indb 8

2-8

12/22/09 5:56:16 PM

Image 35

Contents Motherboard E5179 First Edition December Contents AI NET Canadian Department of Communications Statement Federal Communications Commission StatementAbout this guide Safety informationElectrical safety Operation safetyBold text Where to find more informationConventions used in this guide TypographyCPU AT5NM10-I specifications summarySpecifications are subject to change without notice Onboard LED Before you proceedMotherboard layout Layout contentsMotherboard overview Overview Central Processing Unit CPUSystem memory Dimm Memory configurationsDS Brand DDR2-800 MHz capabilityE5179AT5NM10-I.indb 12/22/09 55550 PM SS Single-sided / DS Double-sided Dimm support PCI slot Installing an expansion cardConfiguring an expansion card Expansion slotClear RTC RAM 3-pin Clrtc JumpersUSB device wake-up 3-pin USBPW5-8 Keyboard/mouse power 3-pin PS2USBPW1-4Rear panel connectors ConnectorsATX power connectors 24-pin EATXPWR, 4-pin ATX12V Internal connectorsUSB connector 10-1 pin USB56, USB78 Serial ATA connectors 7-pin SATA1, SATA2Internal speaker connector 4-pin Speaker Chassis intrusion connector 4-1 pin ChassisFront panel audio connector 10-1 pin Aafp CPU and chassis fan connectors 3-pin CPUFAN, 3-pin ChafanReset button 2-pin Reset System panel connector 10-1 pin FpanelSystem power LED 2-pin Pled ATX power button/soft-off button 2-pin PwrbtnDigital audio connector 4-1 pin Spdifout Serial port connectors 10-1 pin COM2To run the Support DVD Installing an operating systemSoftware support Support DVD informationUpdating the Bios Managing and updating your BiosAsus Update utility Installing Asus UpdateAsus EZ Flash Select Update Bios from a file, then click NextRecovering the Bios Asus CrashFree BiosMain menu Bios setup programEntering Bios Setup at startup Entering Bios Setup after PostSata 1/2 System TimeSystem Date Day xx/xx/xxxx System Information Storage ConfigurationAdvanced menu Chipset CPU ConfigurationOnboard Devices Configuration USB Configuration Acpi Apic Support Enabled Power menuSuspend Mode S3 Only Acpi 2.0 Support EnabledHardware Monitor APM ConfigurationBoot Settings Configuration Boot menuBoot Device Priority Select the Change Supervisor Password item and press Enter Wait For ‘F1’ If Error EnabledHit ‘DEL’ Message Display Enabled Change Supervisor PasswordPassword Check Setup User Access Level Full AccessChange User Password Clear User PasswordExpress Gate Auto Tools menuAI NET Check Realtek LAN cable DisabledExit menu