Asus AT5NM10T-I manual Advanced menu, Storage Configuration, System Information

Page 33

2.3.4Storage Configuration

The items in this menu allow you to set or change the configurations for the SATA devices installed in the system. Select an item then press <Enter> if you want to configure the item.

Configure SATA as [IDE]

Sets the configuration for the Serial ATA connectors supported by the Southbridge chip. Configuration options: [IDE] [AHCI] [Disabled]

SATA Run Mode Configuration [Compatible]

Sets the SATA run mode configuration. Configuration options: [Compatible] [Enhanced]

2.3.5System Information

This menu gives you an overview of the general system specifications. The BIOS automatically detects the items in this menu.

BIOS Information

Displays the auto-detected BIOS information.

Processor

Displays the auto-detected CPU specification.

System Memory

Displays the auto-detected system memory.

2.4Advanced menu

The Advanced menu items allow you to change the settings for the CPU and other system devices.

Take caution when changing the settings of the Advanced menu items. Incorrect field values can cause the system to malfunction.

BIOS SETUP UTILITY

Main Advanced Power Boot Tools Exit

CPU Configuration

Chipset

Configure CPU.

Onboard Devices Configuration USB Configuration

PCIPnP

ASUS AT5NM10-I

E5179_AT5NM10-I.indb 6

2-6

12/22/09 5:56:15 PM

Image 33

Contents Motherboard E5179 First Edition December Contents AI NET Canadian Department of Communications Statement Federal Communications Commission StatementElectrical safety Safety informationOperation safety About this guideConventions used in this guide Where to find more informationTypography Bold textCPU AT5NM10-I specifications summarySpecifications are subject to change without notice Onboard LED Before you proceedLayout contents Motherboard overviewMotherboard layout Central Processing Unit CPU System memoryOverview Dimm Memory configurationsDS Brand DDR2-800 MHz capabilityE5179AT5NM10-I.indb 12/22/09 55550 PM SS Single-sided / DS Double-sided Dimm support Configuring an expansion card Installing an expansion cardExpansion slot PCI slotClear RTC RAM 3-pin Clrtc JumpersUSB device wake-up 3-pin USBPW5-8 Keyboard/mouse power 3-pin PS2USBPW1-4Rear panel connectors ConnectorsATX power connectors 24-pin EATXPWR, 4-pin ATX12V Internal connectorsUSB connector 10-1 pin USB56, USB78 Serial ATA connectors 7-pin SATA1, SATA2Internal speaker connector 4-pin Speaker Chassis intrusion connector 4-1 pin ChassisFront panel audio connector 10-1 pin Aafp CPU and chassis fan connectors 3-pin CPUFAN, 3-pin ChafanSystem power LED 2-pin Pled System panel connector 10-1 pin FpanelATX power button/soft-off button 2-pin Pwrbtn Reset button 2-pin ResetDigital audio connector 4-1 pin Spdifout Serial port connectors 10-1 pin COM2Software support Installing an operating systemSupport DVD information To run the Support DVDAsus Update utility Managing and updating your BiosInstalling Asus Update Updating the BiosAsus EZ Flash Select Update Bios from a file, then click NextRecovering the Bios Asus CrashFree BiosEntering Bios Setup at startup Bios setup programEntering Bios Setup after Post Main menuSystem Time System Date Day xx/xx/xxxxSata 1/2 Storage Configuration Advanced menuSystem Information Chipset CPU ConfigurationOnboard Devices Configuration USB Configuration Suspend Mode S3 Only Power menuAcpi 2.0 Support Enabled Acpi Apic Support EnabledHardware Monitor APM ConfigurationBoot menu Boot Device PriorityBoot Settings Configuration Hit ‘DEL’ Message Display Enabled Wait For ‘F1’ If Error EnabledChange Supervisor Password Select the Change Supervisor Password item and press EnterChange User Password User Access Level Full AccessClear User Password Password Check SetupExpress Gate Auto Tools menuCheck Realtek LAN cable Disabled Exit menuAI NET