Asus P8H61-m2, si r2.0 Central Processing Unit CPU, Installing the CPU, Load lever Retention tab

1.6Central Processing Unit (CPU)

The motherboard comes with a surface mount LGA1155 socket designed for the Intel® 3rd/2nd Generation Core™ i7/ i5/ i3/ Pentium® / Celeron® processors.

Unplug all power cables before installing the CPU.

• Upon purchase of the motherboard, ensure that the PnP cap is on the socket and the socket contacts are not bent. Contact your retailer immediately if the PnP cap is missing, or if you see any damage to the PnP cap/socket contacts/motherboard components. ASUS will shoulder the cost of repair only if the damage is shipment/transit-related.

•Keep the cap after installing the motherboard. ASUS will process Return Merchandise

Authorization (RMA) requests only if the motherboard comes with the cap on the

LGA1155 socket.

•The product warranty does not cover damage to the socket contacts resulting from incorrect CPU installation/removal, or misplacement/loss/incorrect removal of the PnP cap.

1.6.1Installing the CPU

To install a CPU:

1.Locate the CPU socket on the motherboard.

P8H61-M2/TPM/SI R2.0

P8H61-M2/TPM/SI R2.0 CPU socket LGA1155

2.Press the load lever with your thumb (A), and then move it to the right (B) until it is released from the retention tab.

To prevent damage to the socket pins, do not remove the PnP cap unless you are installing a CPU.

Load lever

A

B

Retention tab

1-8

E7361_P8H61-M2-TPM-SI R2.0_Manua8 8

ASUS P8H61-M2/TPM/SI R2.0

5/16/12 1:43:59 PM