Asus P8H61-m2, tpm Asus Bios Updater, Before updating Bios, Booting the system in DOS environment

2.1.4ASUS BIOS Updater

The ASUS BIOS Updater allows you to update BIOS in DOS environment. This utility also allows you to copy the current BIOS file that you can use as a backup when the BIOS fails or gets corrupted during the updating process.

The succeeding utility screens are for reference only. The actual utility screen displays may not be same as shown.

Before updating BIOS

1.Prepare the motherboard support DVD and a USB flash drive in FAT32/16 format and single partition.

2.Download the latest BIOS file and BIOS Updater from the ASUS website at http://support.asus.com and save them on the USB flash drive.

NTFS is not supported under DOS environment. Do not save the BIOS file and BIOS

Updater to a hard disk drive or USB flash drive in NTFS format.

3.Turn off the computer and disconnect all SATA hard disk drives (optional).

Booting the system in DOS environment

1.Insert the USB flash drive with the latest BIOS file and BIOS Updater to the USB port.

2.Boot your computer. When the ASUS Logo appears, press <F8> to show the BIOS Boot Device Select Menu. Insert the support DVD into the optical drive and select the optical drive as the boot device.

Please select boot device:

SATA: XXXXXXXXXXXXXXXX

USB XXXXXXXXXXXXXXXXX

UEFI: XXXXXXXXXXXXXXXX

Enter Setup

↑and ↓ to move selection ENTER to select boot device ESC to boot using defaults

3.When the Make Disk menu appears, select the FreeDOS command prompt item by pressing the item number.

4.At the FreeDOS prompt, type d: and press <Enter> to switch the disk from

Drive C (optical drive) to Drive D (USB flash drive).

Welcome to FreeDOS (http://www.freedos.org)!

C:\>d:

D:\>

2-4 ASUS P8H61-M2 Series

E7361_P8H61-M2-TPM-SI R2.0_Manua4 4

5/16/12 1:44:42 PM