Asus tpm Active Processor Cores All, Limit Cpuid Maximum Disabled, Execute Disable Bit Enabled

Page 53

Active Processor Cores [All]

Allows you to choose the number of CPU cores to activate in each processor package. Configuration options: [All] [1] [2] [3]

Limit CPUID Maximum [Disabled]

[Enabled]

Allows legacy operating systems to boot even without support for CPUs

 

with extended CPUID functions.

[Disabled]

Disables this function.

Execute Disable Bit [Enabled]

[Enabled]

Enables the No-Execution Page Protection Technology.

[Disabled]

Forces the XD feature flag to always return to zero (0).

Intel Virtualization Technology [Disabled]

[Enabled]

Allows a hardware platform to run multiple operating systems separately

 

and simultaneously, enabling one system to virtually function as several

 

systems.

[Disabled]

Disables this function.

Hardware Prefetcher [Enabled]

[Enabled]

Allows a hardware platform to run multiple operating systems separately

 

and simultaneously, enabling one system to virtually function as several

 

systems.

[Disabled]

Disables this function.

Adjacent Cache Line Prefetch [Enabled]

[Enabled]

Allows a hardware platform to perform adjacent cache line prefetching.

[Disabled]

Disables this function.

CPU Power Management Configuration

CPU Ratio [Auto]

Allows you to set the ratio between the CPU Core Clock and the BCLK Frequency. Use <+> and <-> keys to adjust the ratio. The valid value ranges vary according to your CPU model.

Enhanced Intel SpeedStep Technology [Enabled]

Allows you to enable or disable the Enhanced Intel® SpeedStep Technology (EIST).

[Disabled]

The CPU runs at its default speed.

[Enabled]

The operating system controls the CPU speed.

Turbo Mode [Enabled]

Allows you to enable or disable the Intel® Turbo Mode Technology.

[Enabled] Allows processor cores to run faster than marked frequency in specific condition.

[Disabled] Disables this function.

CPU C1E [Auto]

Enables or disables the C1E support function. This item should be enabled in order to enable the Enhanced Halt State. Configuration options: [Auto] [Enabled] [Disabled]

Chapter 2: BIOS information

2-15

E7361_P8H61-M2-TPM-SI R2.0_Manua15 15

5/16/12 1:45:03 PM

Image 53
Contents Motherboard Offer to Provide Source Code of Certain Software Copyright 2012 ASUSTeK Computer INC. All Rights ReservedContents Software support Appendices Electrical safety Safety informationOperation safety About this guideConventions used in this guide Where to find more informationTypography Bold textP8H61-M2/TPM/SI R2.0 specifications summary USB E7361P8H61-M2-TPM-SI R2.0Manua10 16/12 14344 PM Welcome Package contentsSpecial features Intel H61 Express Chipset Gigabit LAN solutionPCI Express Intel Smart Response Technology SSD Speed with HDD CapacityNetwork iControl Innovative Asus featuresAI Suite Asus Anti-Surge ProtectionGPU Boost Asus CrashFree BiosAsus Fan Xpert Asus MyLogo2Before you proceed Standby Power LEDScrew holes Placement directionMotherboard overview Motherboard layout Layout contentsTo install a CPU Locate the CPU socket on the motherboard Installing the CPUCentral Processing Unit CPU Load lever Retention tabPnP cap CPU notches Load plateGold MarkInsert the load lever under the retention tab Installing the CPU heatsink and fan P8H61-M2/TPM/SI R2.0 CPU fan connector Uninstalling the CPU heatsink and fanOverview System memoryDimm Memory configurationsDDR3-2200 O.C. MHz capability DDR3-2250 O.C. MHz capabilityDDR3-2133 O.C. MHz capability DDR3-2000 O.C. MHz capabilityDDR3-1333 MHz capability Sandy Bridge CPU DDR3-1600 O.C. MHz capabilityDDR3-1333 MHz capability IVY Bridge CPU DDR3-1066 MHz capability IVY Bridge CPU Following table shows how to use the Dimm slotsDDR3-1066 MHz capability Sandy Bridge CPU Sides SS Single-sided DS Double-sided Dimm supportRemoving a Dimm Installing a DimmTo remove a Dimm Outward to unlock the DimmExpansion slots Clear RTC RAM 3-pin Clrtc JumpersAudio 2, 4, 6, or 8-channel configuration ConnectorsRear panel ports LAN port LED indicationsATX power connectors 24-pin EATXPWR, 4-pin ATX12V Internal connectorsSerial port connectors 10-1 pin COM1 CPU and Chassis fan connectors 4-pin CPUFAN, 3-pin ChafanThis connector supports several chassis-mounted functions LPT connector 26-1 pin LPTReset button 2-pin Reset Hard disk drive activity LED 2-pin +HDLEDConfiguration Sata Mode Selection Serial ATA 3.0 Gb/s connectors 7-pin SATA3G1-4Front panel audio connector 10-1 pin Aafp 480Mbps connection speed USB 2.0 connectors 10-1 pin USB78, USB910Speaker connector 4- pin Speaker P8H61-M2/TPM/SI R2.0 Digital audio connector Digital audio connector 4-1 pin SpdifoutClick an item to install Installing an operating systemSoftware support Support DVD informationAsus Update utility Managing and updating your BiosInstalling Asus Update Updating the BiosAsus EZ Flash Select Update Bios from file, then click NextRecovering the Bios Asus CrashFree Bios 3 utilityBooting the system in DOS environment Asus Bios UpdaterBefore updating Bios Bios Updater screen appears as below Updating the Bios fileBios menu screen Bios setup programEntering Bios Setup at startup Entering Bios Setup after PostEZ Mode Menu bar on top of the screen has the following main items Advanced ModeMenu bar Menu items Configuration fieldsBack button Submenu itemsSystem Language English Main menuSystem Date Day xx/xx/xxxx System TimeUser Password Administrator PasswordAi Tweaker menu Asus MultiCore Enhancement EnabledMemory Frequency Auto GPU BoostDisabled Disables this function CPU Power ManagementDram Timing Control Decrease average heat productionTPM Support Disabled CPU ConfigurationIntel Adaptive Thermal Monitor Enabled Advanced menuExecute Disable Bit Enabled Limit Cpuid Maximum DisabledIntel Virtualization Technology Disabled Hardware Prefetcher EnabledIntelR Smart Connect Technology Isct Configuration Disabled PCH ConfigurationHigh Precision Timer Enabled System Agent Configuration Sata ConfigurationOnboard Devices Configuration USB Configuration8 APM Network Stack Monitor menu CPU Temperature / MB Temperature xxxºC/xxxºFCPU / Chassis Fan Speed xxxx RPM or Ignore / N/A CPU Voltage, 3.3V Voltage, 5V Voltage, 12V VoltageChassis Q-Fan Control Enabled CPU Q-Fan Control EnabledCPU temperature SilentChassis Upper Temperature 70ºC Anti Surge Support EnabledChassis Lower Temperature 40ºC Chassis Fan Max. Duty Cycle% 100%Bootup NumLock State On Boot menuFull Screen Logo Enabled Wait for ‘F1’ If Error EnabledSetup Mode EZ Mode Option ROM Messages Force BiosUEFI/Legacy Boot Enabled both Uefi and Legacy Boot Option PrioritiesAsus EZ Flash 2 Utility Tools menuAsus SPD Information Asus O.C. ProfileExit menu E7361P8H61-M2-TPM-SI R2.0Manua28 IC Canadian Compliance Statement Federal Communications Commission StatementCanadian Department of Communications Statement Asus Recycling/Takeback ServicesTelephone AddressOnline support Support faxDeclaration of Conformity