Asus WL-330G manual Bottom view, Rear view, Mounting hook. Use the mounting

Page 14

1.3.2 Bottom view

Mounting hook. Use the mounting

hook to install the device on concrete or wooden surfaces using a roundhead screw.

Air vents. These vents provide ventilation to the device.

Mode switch. Allows you to switch

the device from AP mode to Ethernet adapter mode, or vice versa.

AP mode

Ethernet adapter mode

1.3.3 Rear view

Ethernet port. This port connects the supplied RJ-45 plug and cable.

DC IN socket. This socket connects the power adapter plug.

Reset button. Press this button for more than five seconds (in AP or Ethernet mode) to load the default values. In Ethernet adapter mode, press this button for less than five seconds to connect to the first saved wireless connection in the profile table. See page 3-15 for the reset button function in Ethernet mode.

Mounting hole

Mode switch

Air vents

Ethernet port Reset button

DC IN socket

1-4	Chapter 1: Product introduction

Image 14

Contents 54Mbps Pocket Wireless Access Point WL-330g User Guide E1539 First Edition May Contents Appendix Troubleshooting Federal Communications Commission Statement Regulatory Information/Disclaimers Safety statementsSafety Information MPE StatementRF Exposure Conventions used in this guide About this guideHow this guide is organized This guide contains the following partsAsus Computer International America Asus contact informationASUSTeK Computer INC. Asia-Pacific Asus Computer GmbH Germany and AustriaWL-330g specifications summary Chapter Package contents WelcomeFeatures Top viewMounting hook. Use the mounting Bottom viewRear view LED indicators Modes AP Access Point mode EA Ethernet adapter modeRecommended network settings Access Point modeEthernet adapter mode Ad-hoc networkSingle IP address Asus Pocket Wireless APA single IP bridge environment Hardware installation Before you proceed Device installationSystem requirements Using DC power Using USB bus power Wall mounting PlacementOperating range RangeRoaming information Site surveyConfiguration Device utilities are copied to your computer Installing the utilitiesOther support CD options From the support CD Wireless Setting UtilityLaunching the Wireless Setting Utility From the Windows desktopUsing the Wireless Setting Utility To set the device as an access point APAsus Pocket Wireless Access Point WL-330g Specified settings are applied to the device To set the device as an Ethernet adapter Wireless network icon indications Icon Indicates that Asus Pocket Wireless Access Point WL-330g To adjust the TCP/IP settings of the network adapter Web Configuration utilityAdjusting the TCP/IP settings Set the Subnet Mask to 255.255.255.0. Click OK when finished Using an Internet browser Launching the Web Configuration utilityUsing the Wireless Setting Utility Changing the access point AP configuration Simple SetupConfiguration WPA-PSK Securing your wireless communication using WEP encryption Changing the network settings Access Control Firmware Upgrade Browser refreshes with the new password Regulation DomainCH ID Restoring the default values Parameter Default valueChanging the Ethernet adapter configuration Encryption. See Pass Phrase. See Default Key. See Preamble. SeeAsus Pocket Wireless Access Point WL-330g Site Survey Station StatusTo scan available wireless networks in your location Configuration Asus Pocket Wireless Access Point WL-330g Configuration Asus Pocket Wireless Access Point WL-330g Profile Table Asus Pocket Wireless Access Point WL-330g Configuration Parameter Default value Refer to page 3-19 for detailsFirmware Restoration Firmware Restoration window appearsUsing the device Using the device in a local network Replacing the computer Ethernet cablesDevices Computers2PPPoE Point-to-Point over Ethernet Appendix ProblemAction Asus Pocket Wireless AP does not power upCheck if the Asus Pocket Wireless AP is in Access Point mode Throughput seems slow ProblemAction Appendix