Asus WL-330G manual To set the device as an Ethernet adapter

Page 31

To set the device as an Ethernet adapter

Make sure that you switched the WL-330g to Ethernet adapter mode before launching the Wireless Setting Utility. Use the mode switch to change the device operating mode.

1.The utility auto-detects and displays the WL-330g Ethernet adapter settings. Click Configure to continue.

2.Log on to the configuration window using the password (admin), check the Remember my password option, then click OK.

3.Select a wireless network from the Available Networks field, then click Configure.

• Each wireless network is preceded by an icon for easy identification. Refer to the table on the next page for icon indications.

•Click Add to connect to another wireless network not listed in the field.

ASUS Pocket Wireless Access Point (WL-330g)

3-7

Image 31

Contents 54Mbps Pocket Wireless Access Point WL-330g User Guide E1539 First Edition May Contents Appendix Troubleshooting Federal Communications Commission Statement MPE Statement Safety statementsSafety Information Regulatory Information/DisclaimersRF Exposure This guide contains the following parts About this guideHow this guide is organized Conventions used in this guideAsus Computer GmbH Germany and Austria Asus contact informationASUSTeK Computer INC. Asia-Pacific Asus Computer International AmericaWL-330g specifications summary Chapter Welcome Package contentsTop view FeaturesRear view Bottom viewMounting hook. Use the mounting Modes AP Access Point mode EA Ethernet adapter mode LED indicatorsAccess Point mode Recommended network settingsAd-hoc network Ethernet adapter modeA single IP bridge environment Asus Pocket Wireless APSingle IP address Hardware installation System requirements Device installationBefore you proceed Using DC power Using USB bus power Range PlacementOperating range Wall mountingSite survey Roaming informationConfiguration Other support CD options Installing the utilitiesDevice utilities are copied to your computer From the Windows desktop Wireless Setting UtilityLaunching the Wireless Setting Utility From the support CDTo set the device as an access point AP Using the Wireless Setting UtilityAsus Pocket Wireless Access Point WL-330g Specified settings are applied to the device To set the device as an Ethernet adapter Wireless network icon indications Icon Indicates that Asus Pocket Wireless Access Point WL-330g Adjusting the TCP/IP settings Web Configuration utilityTo adjust the TCP/IP settings of the network adapter Set the Subnet Mask to 255.255.255.0. Click OK when finished Using the Wireless Setting Utility Launching the Web Configuration utilityUsing an Internet browser Simple Setup Changing the access point AP configurationConfiguration WPA-PSK Securing your wireless communication using WEP encryption Changing the network settings Access Control Firmware Upgrade Regulation Domain Browser refreshes with the new passwordCH ID Parameter Default value Restoring the default valuesChanging the Ethernet adapter configuration Preamble. See Encryption. See Pass Phrase. See Default Key. SeeAsus Pocket Wireless Access Point WL-330g Station Status Site SurveyTo scan available wireless networks in your location Configuration Asus Pocket Wireless Access Point WL-330g Configuration Asus Pocket Wireless Access Point WL-330g Profile Table Asus Pocket Wireless Access Point WL-330g Configuration Refer to page 3-19 for details Parameter Default valueFirmware Restoration window appears Firmware RestorationUsing the device Replacing the computer Ethernet cables Using the device in a local networkComputers Devices2PPPoE Point-to-Point over Ethernet Appendix Asus Pocket Wireless AP does not power up ProblemActionCheck if the Asus Pocket Wireless AP is in Access Point mode Throughput seems slow ProblemAction Appendix