Asus WL-330G manual Regulation Domain, Browser refreshes with the new password

Page 44

To change the log on password:

1.Type the new password in the New Password and Retype New Password fields, then click Apply.

2.A message appears indicating that you have successfully changed the log on password.

The browser refreshes with the new password.

Use your new password when launching both the Wireless Setting configuration window and Web Configuration utilities.

Regulation Domain

IEEE 802.11b/g networks are regulated worldwide since these networks use the 2.4GHz ~ 2.5GHz ISM (Instrumentation, Scientific, and Medical) Band. The ASUS Pocket Wireless AP is shipped with a default regulation domain allowed in your country/location.

The FCC (US) and ETSI (Europe) specify operation from 2.4 GHz to 2.4835 GHz. For Japan, operation is specified as 2.4 GHz to 2.497 GHz. For each supported regulatory domain, all channels marked with “Yes” are supported. The channel center frequencies and CH ID numbers are shown on the next page.

3-20	Chapter 3: Configuration

Image 44

Contents 54Mbps Pocket Wireless Access Point WL-330g User Guide E1539 First Edition May Contents Appendix Troubleshooting Federal Communications Commission Statement Safety statements Safety InformationRegulatory Information/Disclaimers MPE StatementRF Exposure About this guide How this guide is organizedConventions used in this guide This guide contains the following partsAsus contact information ASUSTeK Computer INC. Asia-PacificAsus Computer International America Asus Computer GmbH Germany and AustriaWL-330g specifications summary Chapter Package contents WelcomeFeatures Top viewMounting hook. Use the mounting Bottom viewRear view LED indicators Modes AP Access Point mode EA Ethernet adapter modeRecommended network settings Access Point modeEthernet adapter mode Ad-hoc networkSingle IP address Asus Pocket Wireless APA single IP bridge environment Hardware installation Before you proceed Device installationSystem requirements Using DC power Using USB bus power Placement Operating rangeWall mounting RangeRoaming information Site surveyConfiguration Device utilities are copied to your computer Installing the utilitiesOther support CD options Wireless Setting Utility Launching the Wireless Setting UtilityFrom the support CD From the Windows desktopUsing the Wireless Setting Utility To set the device as an access point APAsus Pocket Wireless Access Point WL-330g Specified settings are applied to the device To set the device as an Ethernet adapter Wireless network icon indications Icon Indicates that Asus Pocket Wireless Access Point WL-330g To adjust the TCP/IP settings of the network adapter Web Configuration utilityAdjusting the TCP/IP settings Set the Subnet Mask to 255.255.255.0. Click OK when finished Using an Internet browser Launching the Web Configuration utilityUsing the Wireless Setting Utility Changing the access point AP configuration Simple SetupConfiguration WPA-PSK Securing your wireless communication using WEP encryption Changing the network settings Access Control Firmware Upgrade Browser refreshes with the new password Regulation DomainCH ID Restoring the default values Parameter Default valueChanging the Ethernet adapter configuration Encryption. See Pass Phrase. See Default Key. See Preamble. SeeAsus Pocket Wireless Access Point WL-330g Site Survey Station StatusTo scan available wireless networks in your location Configuration Asus Pocket Wireless Access Point WL-330g Configuration Asus Pocket Wireless Access Point WL-330g Profile Table Asus Pocket Wireless Access Point WL-330g Configuration Parameter Default value Refer to page 3-19 for detailsFirmware Restoration Firmware Restoration window appearsUsing the device Using the device in a local network Replacing the computer Ethernet cablesDevices Computers2PPPoE Point-to-Point over Ethernet Appendix ProblemAction Asus Pocket Wireless AP does not power upCheck if the Asus Pocket Wireless AP is in Access Point mode Throughput seems slow ProblemAction Appendix