3.Select the proper NIC at the same network with the switch, then click on the Discovery icon in the tool bar. After the discovery is done, the left frame of the window will show the MAC addresses of the switches discovered by the CNM as Figure 3.3.
English
Figure 3.3. Available Switches
4.Select the switch you want to manage by clicking on the MAC address, then you can start to configure the switch by CNM.
5.If the CNM cannot discover the switch you want to manage, please repeat step 1 to 4 again.
Note: The switch must be powered on and connect to your network before starting the CNM.
GigaX Centralized Network Management User’s Manual | 13 |