BenQ MX722 user manual Operation, Starting up the projector

Page 19

Operation

Starting up the projector

1.Plug the power cord into the projector and into a

power outlet. Turn on the power outlet switch (where fitted). Check that the POWER indicator light on the projector lights orange after power has been applied.

Please use the original accessories (e.g. power cord) only with the device to avoid possible dangers such as electric shock and fire.

2.Press POWER or ON to start the

projector. As soon as the lamp lights up, a "Power On Ring Tone" will be heard. The POWER indicator light flashes green and stays green when the projector is on.

The start up procedure takes about 30 seconds. In the later stage of start up, a startup logo is projected.

(If necessary) Rotate the focus ring to adjust the image clearness.

To turn off the ring tone, see "Turning off the Power On/Off Ring Tone" on page 34 for details.

If the projector is still hot from previous activity, it will run the cooling fan for approximately 90 seconds before energizing the lamp.

3.If the projector is activated for the first time, select your OSD language following the on- screen instructions.

4.If you are prompted for a password, press the arrow keys to enter a six-digit password. See "Utilizing the password function" on page 23 for details.

5.Switch all of the connected equipment on.

6.The projector will start to search for input

signals. The current input signal being scanned displays in the upper left corner of the screen. If the projector doesn't detect a valid signal, the message “No Signal” will continue displaying until an input signal is found.

You can also press SOURCE on the projector or remote control to select your desired input signal. See "Switching input signal" on page 25 for details.

If the frequency/resolution of the input signal exceeds the projector's operating range, you will see the message “Out of Range” displayed on the background screen. Please change to an input signal which is compatible with the projector's resolution or set the input signal to a lower setting. See "Timing chart" on page 58 for details.

Operation 19

Image 19
Contents MX722 Digital Projector Table of contents Safety Instructions Important safety instructionsSafety Instructions 3000 m Feet Ceiling mounting the projector Introduction Projector featuresShipping contents Front/upper side Projector exterior viewRear/lower side Projector Controls and functionsON/ OFF Remote control+/PAGE Test Remote control effective rangeOperating the Laser pointer MuteReplacing the remote control batteries Front Ceiling Positioning your projectorChoosing a location Front TableInch Max Average Projection dimensionsObtaining a preferred projected image size OffsetConnection ConnectionConnecting audio Connecting video source devicesPlaying sound through the projector Device About the microphone inputStarting up the projector OperationFine-tuning the image size and clarity Adjusting the projected imageAdjusting the projection angle Auto-adjusting the imageCorrecting keystone Below is the overview of the OSD menu Using the menusHighlight Change Security Settings and press MODE/ENTER Using a security cable lockUtilizing the password function Setting a passwordEntering the password recall procedure If you forget the passwordChanging the password Disabling the password function Switching input signalChanging Color Space Selecting the aspect ratio Magnifying and searching for detailsAbout the aspect ratio Go to the Picture Picture Mode menu Using Wall ColorSelecting a picture mode Setting the User 1/User 2 modeFine-tuning the image quality in user modes 3D Color Management Setting a preferred color temperatureResetting current or all picture modes Setting the presentation timerSelection Description Top-Left Bottom-Left Top-Right Bottom-Right To cancel the timer, perform the following stepsRemote paging operations Freezing the imageOperating in a high altitude environment To activate the High Altitude ModeHiding the image Locking control keysUsing the test pattern Adjusting the soundUsing the teaching templates Shutting down the projector Direct power offWall Color Menu operationMenu system Main menu Sub-menu Options12 hr System Setup BasicSleep Timer Min/30 minStatus Main menu Sub-menu Options System Setup AdvancedIP Address Current System Status Description of each menu Fine Tuning 3D Color Picture ModeTemperature Color TemperatureColor Space TimerInstallation SearchRemote System Setup Basic menFunction Description OperationLamp System Setup Advanced menu Function Description HighAltitude AudioNetwork System Setup Advanced menu Function DescriptionReset All StandbyStatus Information menu Function DescriptionCurrent SystemCare of the projector MaintenanceGetting to know the lamp hour Setting Lamp Mode as EconomicSetting Auto Power Off Lamp informationStatus Message Timing of replacing the lampReplacing the lamp Connect the power and restart the projector Resetting the lamp timer Thermal events IndicatorsLight Status & Description Power events Lamp eventsTroubleshooting Projector specifications SpecificationsCeiling mount installation DimensionsSupported timing for PC input Timing chartKHz Supported timing for Hdmi Hdcp input Resolution Mode Frequency KHz MHzTiming Supported timing for Component-YPbPrinputSupported timing for Video and S-Video inputs Disclaimer Warranty and Copyright informationLimited warranty Copyright
Related manuals
Manual 62 pages 17.56 Kb

MX722 specifications

The BenQ MX722 is a highly versatile and feature-rich projector designed for both educational and professional environments. With its advanced technologies and user-friendly features, it delivers exceptional performance and reliability.

One of the standout features of the BenQ MX722 is its impressive brightness of 4000 ANSI lumens. This high level of brightness ensures that presentations and videos are clear and vibrant, even in well-lit rooms. Coupled with a native XGA resolution of 1024x768 pixels, the projector produces sharp images with excellent detail, making it ideal for showcasing detailed content.

The MX722 utilizes DLP technology, which enhances image quality and reliability. DLP projectors are known for their ability to produce consistent color and contrast, which is vital for maintaining viewer engagement during presentations. The projector's 15,000:1 contrast ratio further enhances image quality by providing deeper blacks and brighter whites, ensuring that visuals are striking and impactful.

In terms of connectivity, the BenQ MX722 is equipped with a comprehensive range of ports, including HDMI, USB, and VGA inputs. This diverse range of connection options allows users to easily connect various devices, from laptops to media players, without the need for additional adapters. The projector also features a built-in speaker, which enhances the audio experience during presentations without requiring external sound systems.

User-friendliness is another hallmark of the MX722. The projector is designed with a simple interface, making it easy to navigate settings and adjust parameters. It also features an automatic vertical keystone correction function, which helps to maintain image integrity even when the projector is not perfectly aligned with the screen.

In addition to its performance features, the BenQ MX722 is designed with energy efficiency in mind. It incorporates eco-friendly technologies that reduce power consumption, making it a cost-effective option for long-term use. The projector also has a long lamp life of up to 10,000 hours in Eco Mode, which minimizes maintenance costs and downtime.

Overall, the BenQ MX722 stands out as a reliable and high-performing projector suited for various professional and educational needs. With its robust features, impressive image quality, and user-friendly design, it provides an exceptional tool for presentations, lectures, and multimedia sharing.