BenQ MX722 System Setup Basic men, Function Description, Operation, Remote, Receiver, Panel Key

Page 44

4. SYSTEM SETUP: Basic men


Function			Description
	Direct Power On
	Direct Power On
	Allows the projector to turn on automatically once the power is fed
	through the power cord.
	Signal Power On
	Sets whether to turn the projector directly on without pressing


	POWER or		ON when the projector is in standby mode and the
	POWER or		ON when the projector is in standby mode and the

signal is feed through the VGA cable.

	Auto Power Off
	Allows the projector to turn off automatically if no input signal is
	detected after a set period of time. See "Setting Auto Power Off" on
	page 49 for details.
Operation	Quick Cooling
Settings	Enables or disables the Quick Cooling function. Selecting On enables
	the function and projector cooling time will be shortened from a
	normal 90-second duration to approximately 30 seconds.
	This function is only available when Instant Restart is off.
	Instant Restart
	Selecting On enables you to restart the projector immediately within
	90 seconds after turning it off.
	Blank Timer
	Sets the image blank time when the Blank feature is activated, once
	elapsed the image will return to the screen. See "Hiding the image" on
	page 33 for details.
	Sleep Timer
	Sets the auto-shutdown timer.

Remote	Allows you to enable all the remote receivers or one specific remote
Receiver	receiver on the projector.

Panel Key	Disables or enables all panel key functions except		POWER on the


Lock	projector and keys on the remote control. See "Locking control keys"
	on page 33 for details.
Background	Sets the background color for the projector.
Color
Splash	Allows you to select which logo screen will display during projector
Screen	start-up.

44 Operation

Image 44

Contents

MX722 Digital Projector Table of contents Important safety instructions Safety InstructionsSafety Instructions 3000 m Feet Ceiling mounting the projector Projector features IntroductionShipping contents Rear/lower side Projector exterior viewFront/upper side Controls and functions Projector+/PAGE Remote controlON/ OFF Remote control effective range Operating the Laser pointerMute TestReplacing the remote control batteries Positioning your projector Choosing a locationFront Table Front CeilingProjection dimensions Obtaining a preferred projected image sizeOffset Inch Max AverageConnection ConnectionPlaying sound through the projector Connecting video source devicesConnecting audio About the microphone input DeviceOperation Starting up the projectorAdjusting the projected image Adjusting the projection angleAuto-adjusting the image Fine-tuning the image size and clarityCorrecting keystone Using the menus Below is the overview of the OSD menuUsing a security cable lock Utilizing the password functionSetting a password Highlight Change Security Settings and press MODE/ENTERChanging the password If you forget the passwordEntering the password recall procedure Changing Color Space Switching input signalDisabling the password function Magnifying and searching for details Selecting the aspect ratioAbout the aspect ratio Using Wall Color Selecting a picture modeSetting the User 1/User 2 mode Go to the Picture Picture Mode menuFine-tuning the image quality in user modes Setting a preferred color temperature 3D Color ManagementSelection Description Setting the presentation timerResetting current or all picture modes To cancel the timer, perform the following steps Remote paging operationsFreezing the image Top-Left Bottom-Left Top-Right Bottom-RightTo activate the High Altitude Mode Hiding the imageLocking control keys Operating in a high altitude environmentAdjusting the sound Using the test patternUsing the teaching templates Direct power off Shutting down the projectorMenu operation Menu systemMain menu Sub-menu Options Wall ColorSystem Setup Basic Sleep TimerMin/30 min 12 hrIP Address Main menu Sub-menu Options System Setup AdvancedStatus Current System Status Description of each menu Picture Mode TemperatureColor Temperature Fine Tuning 3D ColorTimer InstallationSearch Color SpaceSystem Setup Basic men Function DescriptionOperation RemoteSystem Setup Advanced menu Function Description High AltitudeAudio LampSystem Setup Advanced menu Function Description Reset AllStandby NetworkInformation menu Function Description CurrentSystem StatusMaintenance Care of the projectorSetting Lamp Mode as Economic Setting Auto Power OffLamp information Getting to know the lamp hourTiming of replacing the lamp Status MessageReplacing the lamp Connect the power and restart the projector Resetting the lamp timer Indicators Light Status & Description Power eventsLamp events Thermal eventsTroubleshooting Specifications Projector specificationsDimensions Ceiling mount installationKHz Timing chartSupported timing for PC input Resolution Mode Frequency KHz MHz Supported timing for Hdmi Hdcp inputSupported timing for Component-YPbPrinput TimingSupported timing for Video and S-Video inputs Warranty and Copyright information Limited warrantyCopyright Disclaimer

Related manuals

Manual 62 pages 17.56 Kb