BenQ MX722 System Setup Advanced menu Function Description, Standby, Network, Reset All

Function

Description

Network

Selecting On enables the function. The projector is able to provide the

network function when it is in standby mode.

Microphone

Selecting On enables the function. The projector can output the

microphone signal when it is in standby mode and all the necessary

equipment is correctly connected. See "Playing sound through the

projector" on page 17 for details.

Standby

Monitor Out

Selecting On enables the function. The projector can output a VGA

Settings

signal when it is in standby mode and the COMPUTER-1jack is

correctly connected to devices. See "Connection" on page 16 for how

to make the connection.

Audio Pass Through

The projector can play sound when it is in standby mode and the

corresponding jacks are correctly connected to devices. Press / to

choose the source that you wish to use. See "Connection" on page 16

for how to make the connection.

Enabling this function slightly increases the standby power consumption.

Wired LAN

Projection Log In Code

See BenQ Network Projector Operation Guide for details.

Network

AMX Device Discovery

Settings

When AMX Device Discovery is On, the projector can be detected

by AMX controller.

MAC Address

Displays the mac address of this projector.

Returns all settings to the factory preset values.

Reset All

The following settings will still remain: Keystone, Phase, H. Size, User 1,

Settings

User 2, Reference Mode, Color Space Conversion, Language,

Projector Installation, High Altitude Mode, Security Settings,

Network Settings and Baud Rate.