Installing the Camera Software | 5 |
|
Setting Up the Wireless Connection on the WVC2300 Camera | |
| |
| |
Setting Up the Wireless Connection on the WVC2300 Camera
To configure the WVC2300 camera for wireless connectivity, follow these steps:
STEP 1 Click Setup in the toolbar to open the Setup > Basic Setup window.
STEP 2 Enter the appropriate Wireless Settings:
•SSID—The SSID is the network name shared among all devices in a wireless network. Enter the network’s SSID or network name here. The SSID is case sensitive. Default is ciscosb.
•Security—Click Edit Security Settings to display the Wireless Security window.
STEP 3 From the Wireless Security window, select the drop-down list from Security Mode to select the appropriate option based on your wireless network configuration:
-Disabled—No security is implemented on your wireless network. Data is not encrypted before transmission.
-WEP—WEP is a basic encryption method that is not as secure as later methods such as WPA-Personal or WPA2 Personal. However, it is supported by all clients.
-WPA /WPA2 Personal—Offers two encryption methods, TKIP and AES, with dynamic encryption keys.
-WPA /WPA2 Enterprise—Requires that your LAN has a RADIUS server for authentication.
The following describes the settings for each Security Mode option.
WEP
•TX Key—Select the number of the key used for the wireless network.
•WEP Encryption—Select the appropriate option for key length based on your network settings.
•Passphrase—Type in the passphrase used to generate WEP keys for your network and click Generate.
•Key 1-4—Key values can be entered in manually or generated from a passphrase.
