Cisco Systems WVC2300 manual Icon Description, Audio on

Using the Web-Based Configuration Utility	7
Home

Icon	Description
Preset Camera View	Select the preset area to patrol. See “Using Patrol
	Sequence” on page 88 for more information about
	setting these positions. This icon becomes visible after
	enabling RS-485.
Camera Patrol	Move the camera one time through the preset
	positions. This icon becomes visible after enabling RS-
	485.
Move Controls	Allows you to incrementally adjust the camera in four (4)
	directions and back to home. There may be a short
	delay after a direction is clicked.
	The Move Control icon becomes visible after enabling
	RS-485. You also need to connect the camera to an
	external Pelco D protocol device for the Move Control
	to work.
Resolution	Select the desired resolution from the drop-down list.
	The options are AUTO, 640 x 480, 320 x 240, 160 x 120.
	The default is AUTO and lets the camera determine the
	resolution.
Zoom	Click zoom and then drag your mouse to select the
	section you want to magnify. Click the icon again to
	increase the zoom to x4 from x2.
Snapshot	Click to take a single JPEG picture snapshot of the
	video image and save it to a desired location on your
	computer.
Audio On	When the audio is enabled, an icon is displayed on the
	Home window and audio is picked up through the
	camera. You can then use the icons to turn the speaker
	on and off. To enable the sound, see “Audio/Video >
Audio Off	Audio” on page 60.

Cisco PVC2300 and WVC2300 Internet Video Cameras with Audio Administration Guide 40