Configuring the PVC2300 and WVC2300 Cameras | 8 |
|
Setup > Advance Setup | |
| |
| |
Setup > Advance Setup
From the Setup > Advance Setup window you can configure settings for
HTTP/HTTPS, RTP/RTSP, UPnP, Bonjour, QoS, and CoS.
HTTP/HTTPS
•Enable HTTP Alternative Port—Allows you to define the port number used to communicate with the camera using an HTTP connection. The default value is 1024. A value in the range of 1024-65535 can be defined.
The port number must be specified in the URL when accessing the camera’s web-based utility via the LAN or Internet. For example, if the camera’s IP address is 192.168.1.99 and the port is defined as 1028, you would specify the following address: http://192.168.1.99:1028.
•Enable HTTPS Alternative Port—Allows you to define the port number used to communicate with the camera using an HTTPS connection. The default value is 1024. A value in the range of 1024-65535 can be defined. When using a secure connection, video is not available. This option is used only for configuration.
The port number must be specified in the URL when accessing the camera’s web-based utility via the LAN or Internet. For example, if the camera’s IP address is 192.168.1.99 and the port is defined as 1032, you would specify the following address: https://192.168.1.99:1032.
RTP/RTSP
RTSP (Real Time Streaming Protocol) is a standard for connected client(s) to control streaming data (MPEG-4) over the Internet.
RTP (Real-Time Transport Protocol) is an Internet protocol used for transmitting single real-time multimedia data such as audio and video to a select group of connected clients. RTSP uses RTP to format packets of multimedia content.
•RTSP Port—Enter the RTSP Port number (between 1024 to 65535) in the field provided. The default RTSP port is 554.
•RTP Data Port—The camera’s data port number has been pre-configured and can be used for multicasting. It does not normally need to be re- configured. If a port number does need to be changed, please contact your
