Registering and Changing the Server
VB Package Version only
The VB Package Version lets you register the camera server and relay server and thereafter you can connect simply by selecting a registered server. Here we explain how to change the registration of the camera site and relay server.
Registering in a Camera Site List
Adding to a list
A camera server can be registered during connection by clicking the "Register connected site" button or choosing "Register Site" in the File menu. If the site is currently not connected, it can be registered following the procedure below:
1
Procedure
Choose "Camera Site List" from the View menu. When the camera site list appears, click Add.
2
Enter each item and click OK. The site is added to the list.
■Nickname
Any name can be given to the camera server being registered.
■Host Name
Specify the IP address of the camera server.
■Port No.
Specify the Port numbers of each camera server. The port numbers are the values that were set on the camera server.
■Relay Server
| If connections to the camera site being registered is not to be made via a relay |
| server, select "Not Used"; if a relay server is to be used, select the registered name |
46 | of the relay server (see p. 48). |
|
|