e
Note
When You are Connected to a LAN
If the camera server is used via an Intranet and you specify the Web browser proxy setting manually, videos are distributed via the proxy. This can result in a slower frame rate and proxy server overload.
Use the procedure shown below to set up a "No proxy" connection. Note that if you are accessing a camera server that is located outside a firewall on the internet, registration is not required for the camera server.
Setup Examples
Using Internet Explorer
From the "View" menu, select "Internet Options" and click the "Connection" tab. In the "Exception" field, add "Camera server IP address:HTTP conversion server service port". If there are multiple settings, use a semicolon (;) as the separator.
* For Internet Explorer 4.01
Using Netscape Navigator or Communicator
Select "Preferences" from the "Edit" menu and click "Proxies".
In the "No proxy for" setting for "Manual proxy configuration", add "Camera server IP address:HTTP conversion server service port". If there are multiple settings, use a comma (,) as the separator.
* For Netscape Navigator 6.2
The settings for the Web browser vary depending on the version used. Refer to the settings given here and check your browser version.
1
Java Viewers
11