Chapter 2: Overview
2. Overview
2.1 Introduction
Designed for outdoor environment applications, the Wireless P-T-P Ethernet Extender is a high-performance last-mile broadband solution that provides reliable wireless network coverage. As an IEEE 802.11b/g compliant wireless device, the Wireless P-T-P Ethernet Extender is able to provide stable and efficient wireless performance. The extender delivers a much faster data rate than normal wireless devices and higher bandwidth with longer range for outdoor applications.
The Wireless P-T-P Ethernet Extender supports four wireless communication connectivity device types (AP, Wireless Client, Bridge and AP Repeater), allowing for various application requirements.
High output power and reliable performance make the Wireless P-T-P Ethernet Extender an ideal wireless broadband solution for wireless Internet service providers and system integrators.
2.2 Features
•Complies with IEEE 802.11b/g and IEEE 802.11n standards.
•Supports passive PoE, supplied with 12V.
•Highly reliable watertight housing endures almost any harsh environment.
•Four operating modes include AP, Wireless Client, WDS, and AP Repeater.
•Supports 64/128/152-bit WEP and 802.1X, WPA, WPA2, WPA & WPA2, WPA-PSK, WPA2-PSK, and WPA-PSK & WPA2-PSK.
•Includes a user-friendly Web and SNMP-based management interface.
2.3 What’s Included
Your package should contain the following items. If anything is missing or damaged, contact Black Box Technical Support at 724-746-5500 or info@blackbox.com.
LWE100A or LWE100AE
•Wireless P-T-P Ethernet Extender
•Pole-mounting ring
•Power cord and PoE injector
•A printed Quick Installation Guide.
NOTE: You can download this user manual in PDF format from ftp://ftp.blackbox.com/anonymous/manuals/L/LWE100A_rev1_user.pdf
LWE100A-KIT or LWE100AE-KIT
•(2) Wireless P-T-P Extenders, preconfigured for bridging operation
•(2) pole-mounting rings
•(2) power cords and PoE injectors
•A printed Quick Installation Guide.
NOTE: The LWE100A-KIT and LWE100AE-KIT will be ready to deploy in bridging operation. Just plug them in with line-of-sight, and your connection will be established.
2.4 Hardware Description
Figure 2-1 shows the LWE100A. Figure 2-2 illustrates the pole mounting ring and Figure 2-3 shows the power cord and PoE injector. Table 2-1 describes these components.
