Black Box G.SHDSL Four-Wire Ethernet Network Extender Kit, LR0202A-KIT manual Installation

Page 11

Chapter 3: Installation

3. Installation

1. Connect the SHDSL line to the DSL RJ-48 connector on the LR0202A-KIT rear panel.

Pins 4 and 5 for SHDSL line Loop 1

Pins 1 and 2 for SHDSL line Loop 2

Figure 3-1. RJ-48 connector, Pins 4 and 5 and Pins 1 and 2.

2.Connect the Ethernet interface to the RJ-45 Port with the included CAT5 cable.

3.Connect the included power cord to the AC outlet.

CAUTION: Verify that the AC-DC adapter conforms to your country’s AC power requirement and then insert the power plug.

NOTE: The Interconnecting cables should be rated for external use and for the application’s voltage, current, anticipated tem- perature, flammability, and mechanical serviceability.

4.Turn on the power switch. Set one G.SHDSL Four-Wire Ethernet Network Extender as the CO site (master) from the console port and the other as the REMOTE (slave) site.

5.Set the desired data rate for SHDSL connection from the console port.

NOTE: Set both G.SHDSL Four-Wire Ethernet Network Extenders the same.

6. Both G.SHDSL Four-Wire Ethernet Network Extenders will automatically connect with each other.

NOTE: Turn on the power switch, and the LR0202A-KIT will then run self-test routines. There will be two or more handshaking cycles when adaptive rate is selected. The system will automatically adapt to the maximum rate according to the loop distances. The maximum adaptive rate is 4.608 Mbps for 1-pair mode and 9.216 Mbps for 2-pair mode. The maximum fixed data rate is 10.8 Mbps.

Page 11

Image 11
Contents Shdsl Four-Wire Ethernet Network Extender Kit Trademarks Used in this Manual Shdsl Four-Wire Ethernet Network Extender KitFCC and IC RFI Statements Instrucciones DE Seguridad Normas Oficiales Mexicanas NOM Electrical Safety StatementEMC CE StatementInstallation Specifications SpecificationsOverview Introduction FeaturesLED Descriptions OverviewApplication What’s IncludedFront panel Front and Back PanelsInstallation InstallationConnection for console port with RS-232 terminal Console ConfigurationMain Menu Console ConfigurationDSL Mode Screen Configuration ScreenCO/RT DSL Speed ScreenDefault Configuration screen Default Configuration ScreenSystem Information Screen Status ScreenSystem Status Screen Blackbox.com About Black Box Black Box Tech Support FREE! Live /7