Quartz 500 operation manual Setting, Preparation for setting, Key hole Panel house Display

Page 10

5. SETTING

Preparation for setting

To prepare for setting:

1 Unlock the unit. While holding down	2 Remove the panel cover.
the panel, open buttons at both sides of the
unit and lift the panel cover away from

you.
	Panel open button
Panel cover	(at both sides of the unit)
Panel cover

Key hole

Panel house

Display

Control button

3 Make settings using the display and control buttons at the panel house.

Be sure to make settings with the power on.

Upon opening the panel cover, the PAY ENDING button lights up and the unit is in the pay ending setting mode.

Make sure to press SET at the completion of each setting. Contents are NOT stored in memory if SET is not pressed.

8

Image 10

Contents

Simplex Page Table of Contents Precautions SignsFeatures KeysRibbon cassette AccessoriesFeatures Hour indication Current time AM or PM Current date Installing the Ribbon Cassette Panel open buttonEnvironmental Conditions Wall MountingMount the wall mount fittings as shown on the right Daily Operations To prepare for setting Unlock the unit. While holding down SettingPreparation for setting Key hole Panel house DisplaySetting the Pay Period Monthly ClosingWeekly Closing Today is printed on the second line from the topBi-Weekly Closing Today is printed on the ninth line from the topSecond button from the left When you want to apply 12 hourCheck the settings on the display To set the number, the digits must12Hr. SU MO TU WE TH FR SA 100 Day advance time Setting the Day Advance TimeCase of the day advance time 730 a.m Setting the Daylight Saving Time D.S.T Daylight saving time functionStart date of D.S.T /60 How to Cancel D.S.T. Settings Setting the Time Table Program Print color 00 Black 01 Red Time to be setTo set P-01 shown in the table 3Print columnErase under MO MinuteErase under TU Erase under MO SA Staying lit up 1/100Under MO-SA External 1/60 time signal 1/100Make the bars Light upTo check program settings Indication atSetting Number of Seconds for External Time Signal Press Select to cause EXT. Alarm to light upResetting Connecting to AN External Time Signal Installing the Ni-Cd Batteryoptional Temperature -5 to + 45C SpecificationsExternal time signal ConnectionTime Card Specifications Weekly Card Bi-Weekly Card 1406-9806