Quartz 500 operation manual Setting Number of Seconds for External Time Signal

Page 27

Setting Number of Seconds for External Time Signal

This function sets the duration of the external time signal. The setting is enabled only when external time signal is set in the time table program.

•The duration is factory-set at 5 seconds.

•The EXT. ALARM button stays lit up during its setting operation.

12Hr. SU MO TU WE TH FR SA

1/60

1/100

YEAR MONTH DAY HOUR MINUTE SECOND/CARD

RED/BLK. EX.ALM COL.

PAY ENDING DATE/TIME DAY ADV.TIME

D.S.T

PROGRAM

EXT.ALARM

SELECT

SET

1 Press SELECT to cause EXT. ALARM to light up.

12Hr. SU MO TU WE TH FR SA

1/60

1/100

YEAR MONTH DAY HOUR MINUTE SECOND/CARD

RED/BLK. EX.ALM COL.

PAY ENDING DATE/TIME DAY ADV.TIME

D.S.T

PROGRAM

EXT.ALARM

SELECT

SET

2 Press

or

to adjust the

duration in seconds.

Example: To set for 30 seconds, set the second indication at "30".

For the number of seconds, 1 through 30 can be selected

3 Check the settings on the display and press SET .

25

Image 27

Contents

Simplex Page Table of Contents Signs PrecautionsFeatures Hour indication Current time AM or PM Current date AccessoriesFeatures KeysRibbon cassettePanel open button Installing the Ribbon CassetteWall Mounting Environmental ConditionsMount the wall mount fittings as shown on the right Daily Operations Key hole Panel house Display SettingPreparation for setting To prepare for setting Unlock the unit. While holding downMonthly Closing Setting the Pay PeriodToday is printed on the second line from the top Weekly ClosingToday is printed on the ninth line from the top Bi-Weekly ClosingTo set the number, the digits must When you want to apply 12 hourCheck the settings on the display Second button from the left12Hr. SU MO TU WE TH FR SA 100 Setting the Day Advance Time Day advance timeCase of the day advance time 730 a.m Daylight saving time function Setting the Daylight Saving Time D.S.TStart date of D.S.T /60 How to Cancel D.S.T. Settings Setting the Time Table Program Time to be set Print color 00 Black 01 Red3Print column To set P-01 shown in the tableMinute Erase under MOErase under TU Staying lit up 1/100 Erase under MO SALight up External 1/60 time signal 1/100Make the bars Under MO-SAIndication at To check program settingsPress Select to cause EXT. Alarm to light up Setting Number of Seconds for External Time SignalResetting Connecting to AN External Time Signal Installing the Ni-Cd Batteryoptional Connection SpecificationsExternal time signal Temperature -5 to + 45CTime Card Specifications Weekly Card Bi-Weekly Card 1406-9806