Quartz 500 operation manual Wall Mounting, Environmental Conditions

Page 8

Wall Mounting

The unit can be mounted on a wall using the supplied mounting fittings. To mount the unit on a wall, take the following steps:

1 Install the two larger screws into a wall

3.94inches (10 cm) apart. Be sure to keep about 0.12 inch (3 mm) of the screw head out of the wall.

.94"	(10cm)
.94"
3

The supplied screws are intended for use on a thick wooden wall or wooden column. Do not use them on any other materials. There is a danger that the unit may come off.

(3mm)0.12"

2 Mount the wall mount fittings as shown on the right.

Environmental Conditions

Avoid placing the unit in environments that are:

•humid or dusty

•exposed to direct sunshine

•subject to frequent or continuous vibrations

•outside the temperature range between -5° and 45°C

•affected by chemicals or ozone

6

Image 8

Contents

Simplex Page Table of Contents Precautions Signs Features Accessories FeaturesKeysRibbon cassette Hour indication Current time AM or PM Current dateInstalling the Ribbon Cassette Panel open buttonMount the wall mount fittings as shown on the right Wall MountingEnvironmental Conditions Daily Operations Setting Preparation for settingTo prepare for setting Unlock the unit. While holding down Key hole Panel house DisplaySetting the Pay Period Monthly ClosingWeekly Closing Today is printed on the second line from the topBi-Weekly Closing Today is printed on the ninth line from the topWhen you want to apply 12 hour Check the settings on the displaySecond button from the left To set the number, the digits must12Hr. SU MO TU WE TH FR SA 100 Case of the day advance time 730 a.m Setting the Day Advance TimeDay advance time Setting the Daylight Saving Time D.S.T Daylight saving time functionStart date of D.S.T /60 How to Cancel D.S.T. Settings Setting the Time Table Program Print color 00 Black 01 Red Time to be setTo set P-01 shown in the table 3Print columnErase under TU MinuteErase under MO Erase under MO SA Staying lit up 1/100External 1/60 time signal 1/100 Make the barsUnder MO-SA Light upTo check program settings Indication atSetting Number of Seconds for External Time Signal Press Select to cause EXT. Alarm to light upResetting Connecting to AN External Time Signal Installing the Ni-Cd Batteryoptional Specifications External time signalTemperature -5 to + 45C ConnectionTime Card Specifications Weekly Card Bi-Weekly Card 1406-9806