Ricoh AP305 Media j 1.Paper Tray l, Paper Tray j Tray1/A4 l, Media j 2.Paper Size l

Loading Paper

Specifying paper size using the operation panel

Use the following procedure to speci- fy the paper size from the printer's operation panel after loading paper into the bypass tray.

A Press {Media}.
	On Line	Reset	Escape
	Menu	Media	Enter
Power	Error		Data In
			TFWS040E

The following message appears on the panel display.

<Media> j 1.Paper Tray l

B After confirming that “1.Paper Tray” is on the display, press {En- ter}.

<Paper Tray> j

*Tray1/A4 l

C Use {U}{T} to display “Byps.”, and then press {Enter}.

Note

❒If there is no paper in the bypass tray, the Error indicator stays on.

D Use {U}{T} to display “2. Paper Size”, and then press {Enter}.

The current paper size appears on the panel display.

E Select the paper size you have specified for the paper tray.

Standard Paper Size

A Use {U}{T} to display the pa- per size that is in the tray, and then press {Enter}.

The following message appears on the panel display.

<Media> j 2.Paper Size l

Custom Size Paper

A Use {U}{T} to display “Cus-
		5
tom”, and then press {Enter}.
The following message appears
on the panel display.
<Custom>	l
jl/# Width 297mm

B Use {U}{T} to change the third (leftmost) digit of the paper width, and then press {Enter}.

The pointer (l) moves to the right.

<Custom> l

jl/# Width 197mm

Note

❒Press {Escape} to move the pointer to the left.

❒Press {Escape} while the pointer is located at the left- most digit of the width to cancel the settings and return to step D.

<Paper Size> j

A3l

53