Samsung SP-D300B manual Rear of Projector

Page 20

5.Click the [OK] button to close the window, and click the [OK] button of the <Display Properties> window to close the window.

The computer may restart automatically.

6.Shut down the PC and connect to the projector.

Process might vary depending on your type of computer or Windows versions. (For example, [Properties] appears instead of [Properties (R)] as shown in 1.)

This unit appliance supports up to 24 bits per pixel in Color quality when it is used as a PC monitor.

Projected images may differ from the monitor depending on monitor manufacture or Windows versions. When connecting the projector to a PC, check that PC setup complies to display settings supported by this projector. If not, there may be signal problems.

Basic Settings Connecting the Power Connecting to video equipment

1. Rear of Projector

Plug the power cord into the power terminal on the rear side of the projector.

When used outside of the U.S., HAR cord with fittings of an approved agency may be used.

Basic Settings Connecting the Power Connecting to video equipment

Image 20
Contents Page Insert the power plug firmly so that it does not come loose Keep the power cord away from heaters Place the product on the ground carefully There is a danger of fire or explosion Make sure to place your remote control on a table or desk Page Optical engine with advanced DLP technology Front/Upper SideAdjustable Feet UnpackingLED Indications Clearing Indicator ProblemsSold separately Center Rear SideOFF MenuMove Return ExitHdmi 16. P.MODESupported Display Modes Supported Resolution/Size Modes Picture Position Modes576p Component 480p 576i 480i Installing the Projector Zoom and Focus AdjustmentLeveling with Adjustable Feet Screen Size and Projection DistanceScreen Rear of Projector Connecting a DVD player/Cable/Satellite Box via Component Connecting a DVD player/Cable/Satellite Box to HDMI/DVIUsing the Projector Connecting to VCR/Camcorder Connecting to PCConnecting Video Devices Monitor, TV, etc PC in input terminal Component Video You can only adjust Color in S-Video and Video modes You can only adjust Tint in S-Video and Video modesStandard Movie1, Movie2Color Temperature Offset Gain For Hdmi ModeSize NormalInstall Light SettingMaximum and then perform Fine Adjustment again Only activated in the PC environmentTime Sec 90 sec 10 sec 120 sec 30 sec 60 secOff Screen and External Source Installation and ConnectionMenu and Remote Control Defaultfrom the menu Clean the projector using a soft dry cloth North America CIS Asia Pacific Hdmi