Samsung SP-D300B manual Connecting Video Devices Monitor, TV, etc

Page 23

Connect [PC IN] port on the rear side of the projector to the monitor output port of the PC using a PC video cable.

When connections are all completed, connect both power cords of the projector and the PC.

This product supports plug and play, therefore you do not need to install a driver on your PC.

Using the Projector

Turn on the projector and press the [PC] button to select <PC>.

If PC Mode is not available, check PC video cable is in place.

Turn on the PC and set the PC Environment when necessary.

Adjust the screen.(Auto Adjustment)

Sound comes out from PC speakers.

Connecting Video Devices (Monitor, TV, etc.)

- When using the D-sub (analog) output through another video device (monitor, TV, etc.).

Connect the MONITOR OUT terminal of the projector and the D-sub terminal of the video device using a D-sub cable.

After connecting them, turn on your projector and the video device (monitor, TV, etc.).

The MONITOR OUT function only operates when the projector is connected to an external device through the

Image 23

Contents Page Insert the power plug firmly so that it does not come loose Keep the power cord away from heaters Place the product on the ground carefully There is a danger of fire or explosion Make sure to place your remote control on a table or desk Page Front/Upper Side Optical engine with advanced DLP technologyUnpacking Adjustable FeetLED Indications Clearing Indicator ProblemsSold separately Rear Side CenterOFF MenuMove 16. P.MODE ReturnExit HdmiSupported Display Modes Picture Position Modes Supported Resolution/Size Modes576p Component 480p 576i 480i Zoom and Focus Adjustment Installing the ProjectorScreen Size and Projection Distance Leveling with Adjustable FeetScreen Rear of Projector Connecting a DVD player/Cable/Satellite Box via Component Connecting a DVD player/Cable/Satellite Box to HDMI/DVIUsing the Projector Connecting to PC Connecting to VCR/CamcorderConnecting Video Devices Monitor, TV, etc PC in input terminal Component Video Movie1, Movie2 You can only adjust Color in S-Video and Video modesYou can only adjust Tint in S-Video and Video modes StandardNormal Color Temperature Offset GainFor Hdmi Mode SizeLight Setting InstallOnly activated in the PC environment Maximum and then perform Fine Adjustment again60 sec Time Sec 90 sec 10 sec 120 sec 30 secOff Screen and External Source Installation and ConnectionMenu and Remote Control Defaultfrom the menu Clean the projector using a soft dry cloth North America CIS Asia Pacific Hdmi