Samsung SP-D300B manual Install, Light Setting

▶Refer to "Size Support Mode".

1) Off

2) On

Film Mode Using this function, you can set the display mode optimized for playing movies.

▶Film Mode is only supported for [Video], [S-Video] and [Component].

1)Off

2)On

Input Picture Setup Option

* Click the Play()/Stop() button in the table below to view the video file.

Screen		Description
Adjustment
Install	To tailor the picture to the installation location, you can invert the projected images
	vertically/horizontally.
	1)	Front-Floor : Normal Image
	2)	Front-Ceiling : Horizontal/Vertical Reversed Image
	3)	Rear-Floor : Horizontally Reversed Image
	4)	Rear-Ceiling : Vertically Reversed Image
Light Setting	Used to set the image brightness by adjusting the amount of light generated by the
	lamp.

1)Theater : Using this function, you can adjust the light level of the lamp so that you can comfortably watch pictures on the screen even when watching under dark conditions. It also lowers power consumption and extends the life of the lamp.

2)Bright : Used to enhance the brightness in relatively bright ambient light. Since this mode increases the light level of the lamp, you may experience more noise which is produced when the projector is cooled down.

V-KeystoneIf video scences are distorted or tilted, you can compensate for this using the vertical Keystone function.

Play/Stop

Theater

Bright