Samsung ML-1200 manual Control Panel Lights, Control Panel Buttons

Page 18

Control Panel Buttons

Cancel/Reprint

Cancel job

Press Cancel/Reprint and hold until the control panel lights blink to cancel a job the printer is currently printing. The Error light will blink while the print job is cleared from both the printer and the computer, and then return to the Ready mode. This may take some time, depending on the size of the print job.

Note: If the Cancel/Reprint button is accidentally pushed, the job must be reprinted. There is no undo function.

Reprint last page of the job

If you press Cancel/Reprint in the Ready mode, the printer prints the last page of the last print job. See page 5.20.

Control Panel Lights

The control panel lights indicate the status of your printer. If the Error light is on, the printer is experiencing an error. See “Troubleshooting Error Messages” on page 7.17.

Control Panel Light Message

Error Paper Data

Ready mode

The Data light is on and the printer is ready to print.

No action is needed. If you press and hold the Demo button for about 2 seconds, a demo page will print.

Error Paper Data

Processing

The printer is receiving or processing data. Wait for the job to print.

Pressing the Cancel/Reprint button cancels the current job. One or two pages may print as the printer clears the print job. The printer will return to the Ready mode after the job has been canceled.

Toner Save

(on)

Toner Save

(off)

Turn the Toner Save Mode on/off

Press Toner Save to turn the Toner save mode on or off. The printer must be in the Ready mode.

•If the button backlight is on, toner save mode activates and the printer uses less toner to print a document.

•If the button backlight is off, toner save mode is disabled and you will print in normal quality.

To enable or disable the Toner Save mode using this button, the Toner Save Mode option in the printer driver must be set to Printer Setting.

For further information on the Toner Save mode, see page 5.6.

Error Paper Data

Paper out

The printer is out of paper.

Load paper into the printer. For the automatic tray, there is no need to press any button to reset. For the manual tray, press the Demo button after loading.

Error Paper Data

Waiting the Demo button to be pressed

In the Manual Feed mode, the printer is waiting the Demo button to be pressed.

Press the Demo button to start printing. You must press the button to print each page after loading paper into the manual input tray.

 

 

 

 

 

 

 

 

3. 2

 

 

 

USING CONTROL PANEL 3.3

USING CONTROL PANEL

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Visit us at Page Contents Environmental and Safety Consideration Laser Safety StatementPower Saver Fcc Regulations Environmental and Safety ConsiderationRadio Frequency Emissions Canadian Radio Interference RegulationsSpecial Features Handle paper flexiblySpecial Features Printer ComponentsOutput lever Front cover Face-up output slot Control panel Toner cartridge Front cover Power switch Power receptaclePrinter Components USB portUnpack Your Printer Install the Toner Cartridge Install the Toner CartridgeLoading Paper Load PaperIf you are using a USB interface Turn on the PrinterPrint a Demo Before Installing the Printer Software Install the Printer SoftwareInstalling the Printer Software from the CD-ROM Install the Printer SoftwareSoftware Installation Tips Welcome window opens. Click NextFrom the Start menu, select Programs Installing Software from Diskette Making Installation DiskettesInstalling Software Installing Software from DiskettesControl Panel Buttons Control Panel Lights Clean the inside of the printerControl Panel Buttons Start manual feedingControl Panel Lights Control Panel ButtonsWhen you choose print media, consider the following Weight Your printer supports the following paper weightsChoosing Paper and Other Media Media Sizes and Capacities Paper Guidelines Choosing Paper and Other MediaSelecting the Output Location Using the Automatic Input TrayUsing the Manual Input Tray Printing to the Face-Down Output TrayGuidelines Adjust the guide to the edge of the envelope stackPrinting on Envelopes Loading PaperPush the output lever down Printing on Heavy PaperPrinting on Envelopes Print the document After printing, push the output lever upPrinting on Labels Printing on TransparenciesAdjust the guide to fit the width of the paper stack Printing on Preprinted PaperPrinting on Card Stocks Printing a Document Printing a Document You can also see the printable areaThere are two ways to cancel a print job Canceling a Print JobUsing Help To stop a print job from your printerTo enable this feature from the software application Using Toner Save ModeTo enable this feature from your printer There are two ways to enable the Toner Save modePrinting Posters Setting Graphic Properties Printing PostersPrinting Watermarks Darkness ReprintWatermark Printing Watermarks Click Delete Click OKUsing Page Overlay Using Page OverlayDeleting a Page Overlay Click OK to exit the Print dialog boxPrinting in a Network Environment Setting Up the Host ComputerReprinting the Last Start WindowsSetting Up Client PC Printing on a Network EnvironmentSaving toner Remove the toner cartridge from the printer Redistributing TonerToner Cartridge If the print remains lightCleaning the Inside Cleaning the PrinterCleaning the Outside Cleaning the PrinterControl panel is on Troubleshooting ChecklistInsure the Data light on DemoSolving General Printing Problems Solving General Printing Problems Input Area Clearing Paper JamsOutput Area Clearing Paper JamsInside the Printer Open and close the front cover to resume printingSolving Print Quality Problems Solving Print Quality ProblemsPrint Quality Checklist Tips for Avoiding Paper JamsSolving Print Quality Problems Moisture Can cause problemsContact a service representative Software application or the printer propertiesLight status legend Troubleshooting Error MessagesPrinter Light Patterns Paper jam, or no toner cartridgeCommon Windows Problems Troubleshooting Error MessagesPrinter Specifications Overview Paper SpecificationsPaper Specifications Supported Sizes of PaperGuidelines for Using Paper Paper SpecificationsPaper Output Capacity Printer and Paper Storage Environment Envelopes Labels TransparenciesEnvelopes with Using Your Printer with a USB Cable Using Your Printer with a USB CableInstalling the Printer Software Plug the other end into the USB port on the computerPort Frequently Asked Questions About USB Double-click the System iconSystem Requirements Using Your Printer with MacintoshInstalling Software for Macintosh Macintosh Hardware RequirementUsing Your Printer with Macintosh Printing from a MacintoshDarkness/Quality Click Print when you are finished checking your settingsAdvanced Printing LayoutLinux Driver Installation Linux Driver ConfigurationInstallation Install setup script Linux Driver InstallationError light Error messages Cancel, print jobDriver Access Install FeaturesTroubleshooting ChecklistClean General Install Uninstall, driver Resolution Unpack
Related manuals
Manual 80 pages 54.05 Kb

ML-1200 specifications

The Samsung ML-1200 is a noteworthy monochrome laser printer designed to deliver impressively sharp and high-quality printouts, making it a popular choice for both home and small office environments. While it boasts a compact design, the ML-1200 does not compromise on performance, offering a variety of features that enhance productivity and ease of use.

One of the most defining characteristics of the ML-1200 is its print speed. Capable of producing up to 12 pages per minute (ppm), it ensures that users can handle their printing tasks quickly and efficiently. The first page out time is a mere 8.5 seconds, allowing users to receive their documents promptly without unnecessary delays.

Resolution is another critical factor in print quality, and the ML-1200 does not disappoint. With a printing resolution of up to 1200 x 1200 dots per inch (dpi), this printer provides crisp text and detailed graphics, making it suitable for various documents ranging from simple text files to more intricate reports and presentations.

Equipped with Samsung's unique ReCP (Rendering Engine for Clean Page) technology, the ML-1200 enhances the clarity of printed text and images. This technology works by improving edge detail and overall print quality, minimizing the chances of blurry or unclear outputs, which is a common issue with lower-tier models.

In terms of connectivity, the Samsung ML-1200 features standard USB 2.0 support, allowing users to connect the printer directly to their computer seamlessly. While it may lack wireless capabilities, this direct connection provides a stable and reliable interface for personal use.

The device offers a standard paper tray capacity of 150 sheets, along with a one-sheet manual feed slot, catering to different media types. The printer supports various paper sizes, including A4, Letter, and Legal, further enhancing its versatility for various printing tasks.

In conclusion, the Samsung ML-1200 is a robust monochrome laser printer that offers a combination of speed, print quality, and usability, making it an ideal choice for individuals and small businesses looking for a reliable printing solution. Its compact size and efficient technologies ensure that it can easily fit into any workspace while delivering outstanding results consistently.
Top Page Image Contents