Samsung ML-1200 manual Solving Print Quality Problems, Tips for Avoiding Paper Jams

Page 46

Clearing Paper Jams

Tips for Avoiding Paper Jams

By selecting the correct paper types, most paper jams can be avoided. If a paper jam occurs, follow the steps outlined in “Clearing Paper Jams” on page 7.6.

• Follow the procedures in “Load Paper” on page 2.4. Insure

that the adjustable guides are positioned correctly.

• Do not overload the automatic input tray. Insure the paper is

below the paper capacity mark on the inside of the tray.

• Do not remove the paper from the input tray while printing.

• Flex, fan and straighten the paper before loading.

• Do not use creased, damp or highly curled paper.

• Do not mix paper types in the input tray.

• Use only recommended print media. See “Paper

Specifications” on page A.2.

• Insure that the recommended print side is facing up when

Solving Print Quality Problems

Print Quality Checklist

Print quality problems can be resolved by following the checklist below.

•Redistribute the toner in the toner cartridge (see page 6.2).

•Clean the inside of the printer (see page 6.4).

•Adjust the print resolution from the printer properties (see page 5.11).

•Insure Toner Save Mode is off (see page 5.6).

•Troubleshoot general printing problems (see page 7.2).

•Install a new toner cartridge, and check print quality (see page 2.2).

Solving Print Quality Problems

Problem

Solution

 

 

loading paper into both input trays.

• Keep print media stored in an acceptable environment. See

“Printer and Paper Storage Environment” on page A.6.

Light or faded print

If a vertical white streak or faded area appears on the page:

•The toner supply is low. You may be able to temporarily extend the toner cartridge life. See “Redistributing the Toner” on page 6.2. If this does not improve the print quality, install a new toner cartridge.

•The paper may not meet paper specifications (for example, the paper is too moist or too rough). See “Paper Specifications” on page A.2.

•If the entire page is light, the print resolution setting is too light or Toner Save Mode is on. Adjust the print resolution and Toner Save Mode in the printer properties. See page 5.6 and 5.11 respectively.

•A combination of faded or smeared defects may indicate that the toner cartridge needs cleaning. See “Cleaning the Printer” on page 6.4.

•The surface of LSU may be dirty. Clean the LSU. See “Cleaning the Printer”.

7.10

 

PROBLEM SOLVING

 

PROBLEM SOLVING

 

7.11

Page 45 Page 47
Image 46
Page 45 Page 47
Contents Visit us at Page Contents Laser Safety Statement Environmental and Safety ConsiderationPower Saver Fcc Regulations Environmental and Safety ConsiderationRadio Frequency Emissions Canadian Radio Interference RegulationsSpecial Features Handle paper flexiblyPrinter Components Special FeaturesOutput lever Front cover Face-up output slot Control panel Toner cartridge Front cover Power switch Power receptaclePrinter Components USB portUnpack Your Printer Install the Toner Cartridge Install the Toner CartridgeLoading Paper Load PaperTurn on the Printer If you are using a USB interfacePrint a Demo Before Installing the Printer Software Install the Printer SoftwareInstalling the Printer Software from the CD-ROM Install the Printer SoftwareWelcome window opens. Click Next Software Installation TipsFrom the Start menu, select Programs Installing Software from Diskette Making Installation DiskettesInstalling Software Installing Software from DiskettesControl Panel Buttons Control Panel Lights Clean the inside of the printerControl Panel Buttons Start manual feedingControl Panel Lights Control Panel ButtonsWeight Your printer supports the following paper weights When you choose print media, consider the followingChoosing Paper and Other Media Media Sizes and Capacities Paper Guidelines Choosing Paper and Other MediaSelecting the Output Location Using the Automatic Input TrayUsing the Manual Input Tray Printing to the Face-Down Output TrayGuidelines Adjust the guide to the edge of the envelope stackPrinting on Envelopes Loading PaperPush the output lever down Printing on Heavy PaperPrinting on Envelopes Print the document After printing, push the output lever upPrinting on Labels Printing on TransparenciesPrinting on Preprinted Paper Adjust the guide to fit the width of the paper stackPrinting on Card Stocks Printing a Document Printing a Document You can also see the printable areaThere are two ways to cancel a print job Canceling a Print JobUsing Help To stop a print job from your printerTo enable this feature from the software application Using Toner Save ModeTo enable this feature from your printer There are two ways to enable the Toner Save modePrinting Posters Setting Graphic Properties Printing PostersDarkness Reprint Printing WatermarksWatermark Printing Watermarks Click Delete Click OKUsing Page Overlay Using Page OverlayDeleting a Page Overlay Click OK to exit the Print dialog boxPrinting in a Network Environment Setting Up the Host ComputerReprinting the Last Start WindowsSetting Up Client PC Printing on a Network EnvironmentSaving toner Remove the toner cartridge from the printer Redistributing TonerToner Cartridge If the print remains lightCleaning the Inside Cleaning the PrinterCleaning the Outside Cleaning the PrinterControl panel is on Troubleshooting ChecklistInsure the Data light on DemoSolving General Printing Problems Solving General Printing Problems Input Area Clearing Paper JamsOutput Area Clearing Paper JamsInside the Printer Open and close the front cover to resume printingSolving Print Quality Problems Solving Print Quality ProblemsPrint Quality Checklist Tips for Avoiding Paper JamsSolving Print Quality Problems Moisture Can cause problemsContact a service representative Software application or the printer propertiesLight status legend Troubleshooting Error MessagesPrinter Light Patterns Paper jam, or no toner cartridgeCommon Windows Problems Troubleshooting Error MessagesPrinter Specifications Overview Paper SpecificationsPaper Specifications Supported Sizes of PaperPaper Specifications Guidelines for Using PaperPaper Output Capacity Printer and Paper Storage Environment Envelopes Transparencies LabelsEnvelopes with Using Your Printer with a USB Cable Using Your Printer with a USB CableInstalling the Printer Software Plug the other end into the USB port on the computerPort Frequently Asked Questions About USB Double-click the System iconSystem Requirements Using Your Printer with MacintoshInstalling Software for Macintosh Macintosh Hardware RequirementUsing Your Printer with Macintosh Printing from a MacintoshDarkness/Quality Click Print when you are finished checking your settingsAdvanced Printing LayoutLinux Driver Configuration Linux Driver InstallationInstallation Install setup script Linux Driver InstallationError light Error messages Cancel, print jobDriver Access Install FeaturesTroubleshooting ChecklistClean General Install Uninstall, driver Resolution Unpack
Related manuals
Manual 80 pages 54.05 Kb

ML-1200 specifications

The Samsung ML-1200 is a noteworthy monochrome laser printer designed to deliver impressively sharp and high-quality printouts, making it a popular choice for both home and small office environments. While it boasts a compact design, the ML-1200 does not compromise on performance, offering a variety of features that enhance productivity and ease of use.

One of the most defining characteristics of the ML-1200 is its print speed. Capable of producing up to 12 pages per minute (ppm), it ensures that users can handle their printing tasks quickly and efficiently. The first page out time is a mere 8.5 seconds, allowing users to receive their documents promptly without unnecessary delays.

Resolution is another critical factor in print quality, and the ML-1200 does not disappoint. With a printing resolution of up to 1200 x 1200 dots per inch (dpi), this printer provides crisp text and detailed graphics, making it suitable for various documents ranging from simple text files to more intricate reports and presentations.

Equipped with Samsung's unique ReCP (Rendering Engine for Clean Page) technology, the ML-1200 enhances the clarity of printed text and images. This technology works by improving edge detail and overall print quality, minimizing the chances of blurry or unclear outputs, which is a common issue with lower-tier models.

In terms of connectivity, the Samsung ML-1200 features standard USB 2.0 support, allowing users to connect the printer directly to their computer seamlessly. While it may lack wireless capabilities, this direct connection provides a stable and reliable interface for personal use.

The device offers a standard paper tray capacity of 150 sheets, along with a one-sheet manual feed slot, catering to different media types. The printer supports various paper sizes, including A4, Letter, and Legal, further enhancing its versatility for various printing tasks.

In conclusion, the Samsung ML-1200 is a robust monochrome laser printer that offers a combination of speed, print quality, and usability, making it an ideal choice for individuals and small businesses looking for a reliable printing solution. Its compact size and efficient technologies ensure that it can easily fit into any workspace while delivering outstanding results consistently.
Top Page Image Contents