Control panel overview
display
Shows the current status and prompts during an operation. The message shows with specific LEDs as below. LEDs are working with short message on a display.
•error LED
Blinks when the error occurs on your machine. If it blinks rapidly, the machine has stopped for some reason. Check the display message to solve the problem.
•paper LED
1Blinks when the paper in the tray is empty.
•toner LED
Blinks when the toner cartridge is almost empty or is not Samsung- genuine cartridge. If it blinks rapidly, the toner cartridge is totally empty. Check the display message and replace the toner cartridge.
•paper jam LED
Lights blink when there is a paper jam in the machine. Check the display message to release the jammed paper.
See page 9.7 about more information on the display messages.
copy buttons
2Copies: Increases the number of printouts. Number can be changed by using up/down arrows. Possible values can be added up to 99.
3Reduce/Enlarge: Press this button to reduce or enlarge an image on the paper. You have to use up/down arrows to change the size.
4Darkness: Defines the degree of darkness. Use up/down arrows to change the level of light/dark in the printouts.
5up/down arrows: Moves to the next value when the one of copy buttons pressed.
6Stop/Clear: Stops an operation at any time. Also, You can print a machine report by pressing this button for about 4 seconds.
7Scan to PC: Scans an original to your computer.
8Start Copy: Starts a copy job.
9You can power on or off the control panel by pressing and holding this button for a few seconds.
1.4 <Introduction>