The following four tabs display at the top of the window.
•General - allows you to change the paper size, the paper type, and the orientation of the documents, enables the duplex feature, adds start and end banners, and changes the number of pages per sheet.
•Text - allows you to specify the page margins and set the text options, such as spacing or columns.
•Graphics - allows you to set image options that are used when printing images/files, such as color options, image size, or image position.
•Device: allows you to set the print resolution, paper source, and destination.
5Click Apply to apply the changes and close the Properties window.
6Click OK in the LPR GUI window to start printing.
7The Printing window appears, allowing you to monitor the status of your print job.
To abort the current job, click Cancel.
Printing Files
You can print many different types of files on the Samsung machine device using the standard CUPS way - directly from the command line interface. The CUPS lpr utility allows you do that. But the drivers package replaces the standard lpr tool by a much more
To print any document file:
1Type lpr <file_name> from the Linux shell command line and press Enter. The LPR GUI window appears.
When you type only lpr and press Enter, the Select file(s) to print window appears first. Just select any files you want to print and click Open.
2In the LPR GUI window, select your printer from the list, and change the printer and print job properties.
For details about the properties window, see page 27.
3Click OK to start printing.
Scanning a Document
You can scan a document using the Unified Driver Configurator window.
1
2Click the 
button to switch to Scanners Configuration.
3Select the scanner on the list.
Click your scanner.
When you have only one MFP device and it is connected to the computer and turned on, your scanner appears on the list and is automatically selected.
If you have two or more scanners attached to your computer, you can select any scanner to work at any time. For example, while acquisition is in progress on the first scanner, you may select the second scanner, set the device options and start the image acquisition simultaneously.
4Click Properties.
5Load the document to be scanned face up into the ADF
(Automatic Document Feeder) or face down on the document glass.
6 Click Preview in the Scanner Properties window.
28