Samsung CLP-660, CLP-610 manual Graphic, System Setup, Emulation

Menu	Description
Paper Source	You can select the tray to process the print job. If
	you select Auto, your machine supplies the
	paper from the multi-purpose tray first, then the
	tray 1, and tray 2 for the last. So if any tray is
	empty, then the machine tries to search the
	paper from the next available tray. (See page 3.5
	for more information)
Tray Chaining	When you select any other value except Auto
	from Paper Source and the selected tray is
	empty, you can set the machine to automatically
	print from other trays.
	If this menu item is set to Off, the machine does
	not print until you insert paper into the specified
	tray.

Graphic

Menu	Description
Resolution	You can select the default resolution. If the
	resolution is high, the clarity of the printouts is
	sharper, but the print time may take longer.
	•	Draft: If the printer language is PCL and your
		print jobs are text, select this option for the
		best speed and printing quality. This option is
		available only with PCL driver.
	•	Normal: If your print jobs are mostly text,
		select this option for the highest quality output.
	• Best: select this option when your job contains
		bitmapped images, such as scanned photos or
		certain business graphics, that will benefit
		from enhanced line screening.

System Setup

Menu	Description
Language	The language setting for the display on the
	control panel determines the language of the text
	that appears on the control panel display and for
	printing information. (See page 3.4 for more
	information)
Power Save	When the machine does not receive data for an
	extended period of time, power consumption is
	automatically lowered. You can set how long the
	machine waits before going to power save. (See
	page 3.5 for more information)

Menu	Description
Auto Continue	This item determines whether or not the machine
	continues printing when it detects paper that is
	not matched to your paper setting.
	•	Off: If a paper mismatch occurs, the message
		remains on the display and the machine
		remains off-line until you insert the correct
		paper.
	•	On: If the paper is mismatched, an error
		message displays. The machine goes off-line
		for 30 seconds then automatically clears the
		message and continues printing.
Altitude Adj.	You can optimize the print quality according to
	your altitude.
Auto CR	This option allows you to append the required
	carriage return to each line feed, which is useful
	to the Unix user or DOS user.
	Refer to the following samples:
			AA	AA
			BB	BB
			CC	CC
			LF	LF+CR
Job Timeout	You can set the amount of time a single print job
	is active before it must print. The machine
	handles incoming data as a single job, if it comes
	in within the specified time. When an error
	occurs while processing data from the computer
	and the data flow stops, the machine waits the
	specified amount of time and then cancels
	printing if data flow does not resume. (See page
	3.4 for more information)
Maintenance	This menu allows you to maintain consumables
	within the machine and check supplies' life. You
	can clean fuser components. (See page 6.1 for
	more information)
Clear Setting	This menu item allows you to restore the
	printer's factory default settings.

Emulation

Menu	Description
Emulation Type	You can select the machine language. If the
	languages from the computer and the machine
	are different, the printing quality can not be
	confirmed. It is recommended to set this menu to
	Auto to switch the proper language.

1.8 <Introduction>