3Grasp the handles on the empty toner cartridge and pull to remove the cartridge from the machine.
Caution
If you open the front door, be careful not to touch the underneath of the control panel (the lower part of the fuser unit). The temperature of the fuser unit might be high and could damage your skin.
Note
When you open the front door and work inside the machine, it is highly recommend that you remove the paper transfer belt first. Because the work you do could contaminate the paper transfer belt.
4Take a new toner cartridge out of its package.
Caution
•Don't use sharp objects, such as a knife or scissors, to open the toner cartridge package. You could damage the surface of the toner cartridge.
•To prevent damage, do not expose the toner cartridge to light for more than a few minutes. Cover it with a piece of paper to protect it if necessary.
5Holding both handles on the toner cartridge, thoroughly rock it from side to side to evenly distribute the toner.
6Place the toner cartridge on a flat surface, as shown, and remove the paper covering the toner cartridge by removing the tape.
Note
If toner gets on your clothing, wipe it off with a dry cloth and wash it in cold water. Hot water sets toner into fabric.
7Make sure the color of the toner cartridge matches the color slot and then grasp the handles on the toner cartridge. Insert the cartridge until it clicks into place.
8Close the front cover. Make sure the cover is securely latched, and then turn the machine on.
Caution
If the front cover is not completely closed, the machine will not operate.