Samsung ML-4050 Series Printing a demo, Changing the display language, Using toner save mode

Page 21

Network menu

This menu lets you configure the network interface installed in your printer. You can reset the network interface and print a configuration page. For details, see page 4.1.

Item

 

Explanation

 

 

TCP/IP

This item allows you to manually set the TCP/IP

 

addresses or receive the addresses from the

 

network.

 

•

DHCP: The DHCP server allots the IP address to

 

 

you automatically.

 

•

BOOTP: The BOOTP server allots the IP address

 

 

to you automatically.

 

•

Static: You can enter IP Address, Subnet Mask,

 

 

and Gateway manually.

 

 

EtherTalk

This item lets you select whether or not you use the

 

EtherTalk protocol. Select On to use the protocol.

 

 

NetWare

This item lets you select the IPX frame type.

 

•

Auto: You can set the printer to select the frame

 

 

type automatically.

 

•

802.2: Select this value to use the IEEE 802.2

 

 

frame type.

 

•

802.3: Select this value to use the IEEE 802.3

 

 

frame type.

 

• Ethernet II: Select this value to use the Ethernet 2

 

 

frame type.

 

•

SNAP: Select this value to use the SNAP frame

 

 

type.

 

•

Off: You can disable the NetWare protocol.

 

 

Ethernet

This item allows you to select the ethernet speed.

Speed

 

 

 

 

Wireless

Configure the wireless network environments.

 

See 10.4.

 

 

Note

 

 

This menu only appears when an optional

 

 

wireless network interface card has been

 

 

installed.

 

 

Clear

This item performs a simple reset and restores the

Setting

factory default settings for the network

 

configuration. This setting will only take effect after

 

you restart the printer.

 

 

Network

This item prints a page showing the network

Info

parameters you set.

 

 

 

Printing a demo page

After setting up your printer, print a demo page to make sure that the printer is operating correctly.

Press and hold Demo for about 2 seconds.

Or,

1Press Menu and then OK when Information appears.

2Press the Scroll buttons until Demo Page appears and press OK.

3Press OK when Yes appears. A demo page prints out.

Changing the display language

To change the language that is displayed on the control panel, follow these steps:

1Press Menu until System Setup appears on the bottom line of the display and press OK.

2Press the Scroll buttons until Language appears and press OK.

3Press the Scroll buttons to select the language you want and press OK.

4Press Stop to return to Standby mode.

Using toner save mode

Toner save mode allows the printer to use less toner on each page. Activating this mode extends the life of your toner cartridge and reduces your cost per page beyond what one would experience in the normal mode, but it reduces print quality.

There are two ways to enable this mode:

Using the control panel button

Press Toner Save on the control panel. The printer must be in Standby mode; the Status LED lights green and Ready is shown on the display.

•If the button backlight is on, the mode is enabled and the printer uses less toner to print a page.

•If the button backlight is off, the mode is disabled and the printer prints in normal mode.

From the software application

You can set toner save mode from the printer properties window on your printer driver. See the Software section.

2.6 <System setup>

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Page Page Country Customer Care Center Web Site Contact Samsung WorldwideContents Troubleshooting Installing accessoriesSpecifications Important Precautions and Safety Information Safety and Regulatory InformationEnvironmental and Safety Consideration Laser Safety StatementPower Saver Ozone SafetyRecycling Radio Frequency EmissionsDeclaration of Conformity European Countries United States of AmericaWireless Guidance Regulatory Compliance StatementsReplacing the Fitted Plug for UK Only EU D e c la ra tio n o f Co n fo rm ity R & T T E Special features IntroductionSoftware section You can print in Windows 98/Me/NT 4.0/2000/XP 2003/VistaMacintosh Front view Printer overviewControl panel overview Finding more informationClearance space Selecting a locationSystem setup Using control panel menusAccessing control panel menus Menu overview Job manager menuInformation menu Paper menu Layout menuGraphic menu System Setup menuPostScript Emulation menuUsing toner save mode Printing a demoChanging the display language Supplied software Software overviewPrinter driver features System requirementsWindows Linux MacintoshRequirements Network setup Via network administration programsVia the control panel Configuring EtherTalk Configuring TCP/IPDynamic addressing BOOTP/DHCP Supported operating systemsSetting Ethernet speed Configuring IPX frame typesRestoring the network configuration Printing a network configurationSelecting print media Loading print mediaType Size Weight Type Size Dimensions Weighta CapacitybSupported sizes of paper Print media for duplex printingGuidelines for selecting and storing print media Guidelines for special print mediaMedia type Guidelines Loading paper Changing the size of the paper in the tray Using the standard tray or the optional traysLoad the paper with the side to be printed on facing up Using the multi-purpose trayTips on using the multi-purpose tray Using manual feed modeSelecting an output location Printing to the output tray Face downPrinting to the rear cover Face up Printing a document Canceling a print job Canceling a print jobBasic printing Printing a documentOrdering supplies and accessories AccessoriesToner cartridges How to purchase Cleaning the printer MaintenanceCleaning the outside of the printer Cleaning the inside of the printerPTL lens Checking the remaining toner Maintaining the toner cartridgeRedistributing toner cartridge Replacing the toner cartridge Maintenance parts Clearing the Toner Low Replace Toner messageItems Yield Average Clearing paper jams TroubleshootingPaper feed area TrayOptional tray Multi-purpose tray Around the toner cartridgePaper exit area Duplex unit areaDuplex jam Troubleshooting checklist Condition Suggested solutionsTips for avoiding paper jams Understanding display messages Understanding the status LEDLow Heat Error Message Meaning Suggested solutions LoadLSU Motor Error OPC is CleaningToner cartridge-related messages Solving general printing problems Spool Settings button Settings and Printers. RightClick the Samsung ML-4050 Series PCL 6 printer iconSolving print quality problems Condition Suggested solutions Curl or wave Condition Suggested solutions VerticalRepetitive DefectsCommon PostScript problems Common Windows problemsCommon Macintosh problems Common Linux problemsInstallable Options section to InstalledPrecautions when installing accessories Installing accessoriesInstalling a memory Dimm Disconnect the power cordSetting the memory in the PostScript printer properties Removing a Dimm Installing a wireless network interface cardConfiguring the wireless network parameters Selecting the authentication typeConfiguring basic network settings Installing the hard disk Using the hard diskSetting Encryption Restoring default values for wireless networkingSetting the time and date Setting the hard disk in the printer propertiesPrinting with the optional hard disk Storing a jobDeleting a stored job Printing a stored jobControlling the active job queue To delete a file from the queuePrinting using the form files To promote a file from the queueTo print a file immediately Specifications Printer specificationsSpecifications and Description Index System requirements Linux 3.3 Macintosh 3.3 Windows Software section Contents Using Windows Postscript Driver Using Your Printer with a Macintosh Installing Printer Software Installing Software for Local PrintingTypical Installation Select Typical installation for a local printer. Click Next Custom InstallationSelect the components to be installed and click Next Select Custom installation. Click NextInstalling Software for Network Printing Custom Installation Select Custom installation. Click Next Reinstalling Printer Software Removing Printer Software Select the components you want to reinstall and click NextSelect your printer driver from the Name drop-down list Printing a DocumentPrinter Settings Layout TabPaper Orientation Paper Tab SourceScaling Printing Resolution Image ModeToner Save Mode Graphics TabJob Setting On the Job SettingExtras Tab Using Help Using a Favorite SettingAbout Tab Printer TabPrinting Multiple Pages on One Sheet of Paper N-Up Printing Advanced PrintingPrinting Booklets Printing PostersPrinting a Reduced or Enlarged Document Printing on Both Sides of PaperFitting Your Document to a Selected Paper Size NoneUsing an Existing Watermark Using WatermarksCreating a Watermark Editing a WatermarkWhat is an Overlay? Using OverlaysUsing a Page Overlay Creating a New Page OverlayAdvanced Using Windows PostScript DriverUsing the right-click menu Using the shortcut iconOverview Direct Print Utility PrintingSetting Up a Client Computer Setting Up a Host ComputerCheck the Share this printer box Select Local Port and click New PortPrinter Setting Troubleshooting GuideUnderstanding Smart Panel Toner LevelChanging the Smart Panel Program Settings Opening the Troubleshooting GuideUsing Printer Settings Utility Using Onscreen Help FileInstalling the Unified Linux Driver Installing the Unified Linux DriverGetting Started Click Uninstall Uninstalling the Unified Linux DriverPrinters Configuration Using the Unified Driver ConfiguratorOpening the Unified Driver Configurator Double-clickUnified Driver Configurator on the desktopConfiguring Printer Properties Ports ConfigurationClasses Tab Printing from Applications Printing FilesFile menu Install the Printer driver Installing Software for MacintoshUninstalling the Printer driver Click ContinueFor a Network-connected Macintosh Setting Up the PrinterFor a USB-connected Mac OS 8.6 ~Changing Printer Settings Layout SettingPrinting a Document ResolutionQuality Printer Features SettingPrinting Multiple Pages on One Sheet of Paper Reverse DuplexDuplex Printing Index Image mode 15 resolution Macintosh GGGGGGGGGGGGGRev
Top Page Image Contents