Item |
| Explanation |
|
| |
Maintenance | This item allows you to maintain your printer. | |
| • | Clean Drum: Cleans the OPC drum of the |
|
| cartridge and produces a cleaning sheet with |
|
| toner debris on it. |
| • | Clean Fuser: Cleans the fuser unit inside of the |
|
| printer and produces a cleaning sheet with |
|
| toner debris on it. |
| • | CLR Empty Msg.: Prevents the Toner Low |
|
| Replace Toner message from appearing on the |
|
| display. Once you have selected On, this |
|
| setting will be permanently written to the |
|
| memory of the toner cartridge, and this menu |
|
| will be disappeared from the Maintenance |
|
| menu. |
| • Supplies Life: This item allows you to check how | |
|
| many pages are printed and how much toner |
|
| are left in the cartridge. |
|
| |
Clear Setting | This menu item allows you to restore the printer’s | |
| factory default settings. | |
|
|
|
Emulation menu
Use the Emulation menu to configure printer language emulation.
Item | Explanation |
|
|
Emulation | The printer language defines how the computer |
Type | communicates with the printer. |
| If you select Auto, your printer can change the |
| printer language automatically. |
|
|
Setup | See the tables on page 2.4 to configure the printer |
| language. |
|
|
PCL
This menu sets the PCL emulation configuration. You can set the font type, symbol type, lines per page, and point size.
Item |
| Explanation |
|
| |
Typeface | You can select the standard font to be used in PCL | |
| emulation. | |
| • | PCL1~PCL7’s interval between letters is fixed, and |
|
| PCL8~PCL45’s interval is proportional to the font |
|
| type and point size. You can adjust the font size of |
|
| PCL1~PCL7 using the Pitch item, and |
|
| PCL8~PCL45 can do using Point Size item. |
| • | PCL46~PCL54’s interval and point size are fixed. |
|
|
|
Item | Explanation |
|
|
Symbol | This item selects the symbol to be used in PCL |
| emulation. The symbol is the group of numbers, |
| marks, and special signs being used when printing |
| letters. |
|
|
Point Size | When you select one between PCL8 and PCL45 from |
| the Typeface menu, you can determine the font size by |
| setting the height of the characters in the font. |
|
|
Courier | This item lets you select the version of Courier font to |
| use. |
|
|
Pitch | When you select one between PCL1 and PCL7 from |
| the Typeface menu, you can determine the font size by |
| setting the number of characters that will print in one |
| horizontal inch of type. The default value, 10 is the |
| best size. |
|
|
Lines | This item allows you to set vertical spacing from 5 to |
| 128 lines for the default paper size. The lines may |
| differ according to the paper size and printing |
| orientation. |
|
|
PostScript
This menu provides you with the Print PS Error menu item.
Item | Explanation |
|
|
Print PS | You can select whether or not your printer prints an |
Error | error list when a PS error occurs. |
| • Select On to print PS 3 emulation errors. If an error |
| occurs, the job stops processing, the error message |
| prints, and the printer flushes the job. |
| • If this menu is set to Off, the job is flushed without an |
| indication of the error. |
|
|
EPSON
This menu sets the EPSON emulation configuration.
Item | Explanation |
|
|
Font | You can select the standard font will be used in |
| EPSON emulation. |
|
|
Character | This item allows you to select a character set of the |
Set | desired language. |
|
|
Character | This item selects the character set. |
Tab. |
|
|
|
Pitch | You can determine the font size by setting the number |
| of characters that will print in one horizontal inch of |
| type. |
|
|
2.4 <System setup>